We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I just got off the phone with talking to a student that had called for some machinery advise. He was so upset about the price of lumber. I just do not get it!
I believe lumber is cheap when compared to my time effort, machinery investment, and skills. Where else can I turn $800.00 investment in to a $4500.00 piece of furniture? I just completed an entertainment center for a flat television. It is not the $800.00 worth of material....it is my 60 hours of labor that makes this piece expensive. I try to buy the best quality lumber I can and I am not too concerned with lumber prices for I know that my labor cost is so high. It is foolish to buy cheap lumber and then spend 60 hours fighting it. What are your thoughts?
>Actually at the wholesale level lumber is cheaper than it has been for some time. Not long ago oak logs were bringing $1/bdft. No more.
I heard this gripe from amateur woodworkers for all the time we sold hardwood lumber. Roughly translated it means "what I am building isn't worth much" so I need some bargain wood. Most money we ever made was selling 500 bdft packs of #3 common walnut. Ignorant customers thought it was a great bargain. It is probably still stored in barns across the land.
>Lumber isn't bad, really. It's easy to drop $50 at the hardware store, though, on abrasives and solvents and finishes. And to do it again in three days.
When I spent $1700 on a new Unisaw, seven years ago, it brought me up short. That was a lot of money. But the saw works as I want, when ever I want it to, and just helped me with a $6700 piece of custom library furniture. And I usually do this for the fun of it...
>I talk with a lot of guys who knows a guy down the road across the creek that sells lumber for cheap prices! Every time I went "cheap" it came back to bite me. I built a kitchen out of some sawmill "cheap" wood and the next winter when the doors started to bow and joints crack I had a very upset customer who I had to build almost a new kitchen for. I learned the lesson the hard ways myself. Buy quality lumber and quality tools!
>Sometimes good llumber is even free - well sort of depending on the natural vegetatition in your area. In my home area we have lotss of trees. Maybe not so many in desert states.
Hook up with a couple of portable sawmillowners, the cuty parks and recreaion guys, and fo;ls om the road districs. Come storm season they often have windfalls to deal with. Peompt acrion from you may secure windfalls and removal trees suited for secondary lumber and maybe even appearance grades. Being at the right place at the right time with a chain saw and a truck or trailer goes a long way to buildin g up a lumber store.
Association with a portable sawmill owner can mean sharsies and half to yield from a tree. All you have to be in this case is a vigilant enabler. Green lumber has to be cared for dried stores etc.
I used to stock 2 to 3 Mbf of the local red maple. Amd about that much in alder, fir, and some specimen tree wood. I even have a 20" ash log about 4 ft long that may make chair staves one of these days. I got rid of much of my stored lumber but I still have a number of trees spotted and I;ve introduced my newly re-located nephew to some of my resource people.
Scrounging free lumber isn't everyone's cup pf tea but it beats paying big prices for stuff that's seldom seen. OTH if you saw your lumber carefully and dry it with care and precision you may get wide thick board of some handsome local stuff the equal of any yard furnushed lumber. It'll not only be free but it will have a story you can bore people with..
>Some very fine points and if you enjoy harvesting your own wood and have the equipment and a kiln to dry it.. makes good practice. However, I am a fine furniture maker. I am not a lumber jack or have no desire to be one. I do not have the equipment to harvest trees and my time is so limited to me getting to build a piece of furniture for myself I want and have to spend my time and efforts in the shop building. This is what makes woodworking such a broad topic and has just about something that interest alot of different people and skills. Please continue finding those beautiful boards...just remember to share!
>Free? Free is never free! You must have an investment in tools....a chainsaw, a truck, a tractor, a kiln, and your labor, etc! So there is no such thing as free lumber unless the wood fairy delivers it!
>I agree. Knowing which tree this chair or table came from is one of the most satisfying things about woodworking for me. Most of my lumber comes off my wife's family's farm, a little from here and there, but I rarely pay for it, and saving money is not even the main reason i do it this way.
>Everything I make is for family , including 2 grandsons and 5 granddaughters. For the small amount of lumber involved for a jewelry box, segmented bowl, chair, etc, price of lumber is not even a consideration. It is tough enough in my area to find top quality wood, let alone consider price.
>I believe that if a tree spends 50+ years growing and surviving drought, storms, ice and insects it deserves to be honored with a decent price for its efforts.
>When beginning solid wood furnture making and becoming aware of all the basic things you need to know - joinery options, how to make them and applications - fitting and detailing techniques - all the structural things - you don't worry about the ultimate look of the wood in terms of the whole finished piece. So one often starts with the "cheapest" raw material.
Only later does it become apparent that there are woods that make things so much easier and better looking - like say Mahogany. It loves to be worked, especially with hand tools and will help you rather than fight you.
But the real fun comes in when deciding which part(s) of which boards will go together to produce the nicest look of the whole piece. If you've got nice (and often "expensive") stock to start with, the flipping and turning and slipping and sliding and rearranging, chalking in outlines and seeing the parts in their final context - THAT's the best part - at least for me.
As noted already, the price of the materials may SEEM a heart stopper as you write the check or sind the credit/debit card slip - but in the long run, it's Pay Me Now, Or Pay Later. You can start with a beautiful board for a door or door panel - or start with a bunch of pieces of boards and spend hours getting something that ends up "adequate" - but certainly not as nice and pleasing to the eye as one selected from a nice piece of stock that's big enough and nice enough.
Penny wise and Pound foolish is often quite true, especially when it comes to stock for a piece.
Now if you happen to know a good sawyer, who happens to also be a woodworker - and you have the luxury of hording wood and the time for it to get dry enough to work . . .