Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Decided on the Kreg Miter Gauge#KMS 7102

Posts

Decided on the Kreg Miter Gauge#KMS 7102

#1

Decided on the Kreg Miter Gauge#KMS 7102

George@Colonel's Workshop-Havertown PA

>Good Evening Friends,

FedEx delivered the box yesterday. It took me an hour or so to assemble the gauge, which was well packed and contained all the necessary parts. It all went together fairly easily, and is nice and snug in the miter slot of my Jet Hybrid Saw. My only concern now is whether the brass pin which maintains the miter's angle at pre-selected position (10, 22 1/2, 30, 45 degrees) will eventually loosen. It is a slip fit/non threaded. It may fall out sometime in the future. The guage, fence, and flip stop are robust. No wobble at all in the miter slot, it slides easily and true. $139@Amazon.

George

Re: Decided on the Kreg Miter Gauge#KMS 7102

#2

Re: Decided on the Kreg Miter Gauge#KMS 7102

Fred Davis

>And a good one to you George,

while your dwelling on the possibility of losing the pin, order a replacement now and tell your wife where it is , so you can find it , if you ever need it .-))

FredD

Re: Decided on the Kreg Miter Gauge#KMS 7102

#3

Re: Decided on the Kreg Miter Gauge#KMS 7102

Scott in Montana

>You can order it, but I doubt they will charge you a penny for it. Always very nice people to deal with.

Scott in Montana