"Newbie" cabinet maker mistake
Terry Alexander
>If you've followed my posts (more questions than anything), I am going to build all the vanities and kitchen cabinets for our new house.
My "test" project was to build a very custom (due to size constraints) vanity for my wife's brother and his wife.
Dang...but with the wisdom from lots of folks on this forum, I was cooking along just great. Everything square, dimensions dead-on....just grand.
Last thing I had to do was mount the doors.
The vanity has 2 doors with a drawer bridge in the middle.
My first attempt at European hinges (3/32" from the edge!).
Dang.....perfect.....just perfect.....except....
If you use the doors as I mounted the hinges, they would either be fold down or fold up doors. Dimensions were 21x23" and I drilled the holes on the wrong side!
Great lesson....so I had to buy more plywood and "fuss" with wrapping it in solid wood and having good 45's. Not much fun the 2nd time.
It worked out great. Delivered it yesterday afternoon.
Got lots of ooh's and ah's.
Thanks for listening..and hope you're laughing.
Terry Alexander in West Texas



