Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Planing Azek?

Posts

Planing Azek?

#1

Bart Goldberg

Planing Azek?

Bart Goldberg

>Like a poster from yesterday, I too am having to repair an exterior door. In this case, its not the door itself, but a piece of trim that sits between the moving and non-moving doors called an Astragal. The original piece was made of wood and coated in some kind of latex paint. It has completed rotted and I need to replace it. The local Weathershield dealer wants to charge me $220.00 for this piece of material. I think I can make it myself, and was considering using Azek, to avoid having to replace again. An 18ft long piece of 1x4 Azek only cost $50.00. I would need to glue two piece together to recreate the original profile, and plane down one of the sections to get to the proper thickness. Any reason to not do this myself? Any problem with putting Azek through my planer?

Thanks

Bart

Re: Planing Azek?

#2

Re: Planing Azek?

Ed Mulligan, Cape Cod

>I had to thickness a piece of Azec recently. I used my bandsaw. A tablesaw would work too, in two passes. Put the sawn surface down or in.

Re: Planing Azek?

#3

Re: Planing Azek?

Fred Davis

>Oak Astragals are a common item in lumber yards and the profiles dop not vary very much.

Unless you have a extremely radical version of a Astragal , try a lumber yard.

1x4 material is way wider then usual.

FredD

Re: Planing Azek?

#4

Re: Planing Azek?

PaulT (UpstateNY)

>I've planed plenty of Azek with no problem though I would use light passes to avoid heat buildup. I've only used Azek for trim, not sure if it would holdup to the abuse a door can incur.

Re: Planing Azek?

#5

Bart Goldberg

Re: Planing Azek?

Bart Goldberg

>Fred,

what do you mean by your statement that a 1x4 is way wider than ususal?

Thanks

Bart

Re: Planing Azek?

#6

Re: Planing Azek?

Fred Davis

>Let me say it this way Bart, I have never in using door sets and hundreds of Astragals and making some occasionally , seen a Astragal the size (meaning width here) of a 1x4.

less then two inches seems to be the norm

FredD

Re: Planing Azek?

#7

Re: Planing Azek?

Greg Young

>Quite apart from planing it I don't think Azek is a suitable material.