Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Kitchen Update

Posts

Kitchen Update

#1

Kitchen Update

Jim Shaver - Oakville, Ont, Canada

>Hi,

My latest Kitchen Update.

Well my kitchen renovation is done! I do still need to finish the drawers, but that will happen today, using Blum Blumotion soft closing sliders (So Nice).

Photobucket

Photobucket

I did re use the existing cabinet designs, re-built some base cabinets and added some details.

Photobucket

I capped the ends of the pantry and wall and base cabinets with faux panels, all made of solid red oak and veneered panels.

Photobucket

Photobucket

Before�

Photobucket

After

Photobucket

I also added base panels on the ends with a routed profile and returned mitered ends.

I have some fine-tuning to do, but the over all look has changed the kitchen nicely.

Now back to some real furniture

Take care,

Jim

Re: Kitchen Update

#2

Re: Kitchen Update

George@Colonel's Workshop-Havertown PA

>Good Morning Jim,

I'm so happy for you that it came out looking so perfect. I do appreciate the work involved, and I know you worked as hard as the contractors who helped here and there. Swing South a bit and re-do our kitchen while you are still razor sharp. We'll be able to get rid of some of the cabinets as we deplete the supply of Molson. :<) Great job.

George

Re: Kitchen Update

#3

Re: Kitchen Update

Jim Shaver - Oakville, Ont, Canada

>Thanks George,

Did you notice your Banana Hanger, it's the one you gave us on your visit here back in 99... it made it to the counter!

Yeah, had a Molson Ex last night in relaxation while watching the Wings pluck some Penguins!

Take care,

Jim

Re: Kitchen Update

#4

Verrry Nice!

Mark Mandell - Gone Round In Jersey

>You'll like the Blumotion.

I really have to get a set of pix of mine (now finished) posted.

Re: Kitchen Update

#5

Under counter lights

Terry Alexander

>Jim....great work.

I am just now beginning my kitchen build...but mine is from scratch.

Curious as to the make/model of your under the counter lights.

In putting them in....what did you learn? What would you do different?

Reason I ask is that whatever I do, once finished I think of things I "coulda/woulda/shoulda" done.

TIA

Terry Alexander in West Texas

Re: Kitchen Update

#6

Plucking Penguins

Lee Schierer - McKean, PA

>The kitchen turned out great. So when is the chirstening party???? I have a passport.....

The Pens don't seem to be able to ge the puck to bounce their way. Hopefully home ice will prove more Penguin friendly.

Lee

Re: Kitchen Update

#7

JL

Nice!

JL

>I like the end panels, they add a lot.

Re: Kitchen Update

#8

Banana Stand

George@Colonel's Workshop-Havertown PA

>Jim,

I noticed it is bent from use and stooped with age after all this time. I recall it looked more like the Washington Monument 10 years ago. Geeze, was it really that long?

George

Re: Kitchen Update

#9

I'm not Jim, but I can talk about

Bill Houghton, Sebastopol, CA

>our under cabinet* lights in our year-old kitchen remodel.

Ours was a to-the-studs remodel, so I was able to put switches where I wanted. Our kitchen is an L-shaped counter on the sink side, and two counters flanking the stove on the other side. I put one switch at the sink controlling all the lights (four) on the sink counter, and one switch for each counter flanking the stove. All the light fixtures were high-efficiency fluorescents with independent toggle switches.

This has been a great solution, as we find we leave the fixture over the sink on all day, but rarely use the others on that side; when we do, we can just reach up and turn on that fixture (or those fixtures). We do use the stove-side fixtures, but sometimes just one side, and not all the time.

I used metal shielded cable (it's possible my inspector would have OKed NM plastic sheathed cable, but I felt better about the metal). Regardless, the scariest part was getting the height of the cable as it exited the wall just right, after figuring the finished height of the cabinets on a very uneven floor. The cabinet-top lights had a couple of spots where I didn't do quite as well, but the under-cabinet lights all worked out fine. I notched the backs of the cabinets so the cable visibility would be minimized.

*My wife, who kept calling them under counter lights (to which I would reply that I didn't want to put lights in the drawers), will be comforted that she isn't alone.

Re: Kitchen Update

#10

Nice work Jim !

Don Orr

>I especially like the end panel by the dishwasher.

Re: Kitchen Update

#11

Ellis Walentine

Very nice, Jim. Congrats.

Ellis Walentine

>What a good job to have behind you. I admire people who can find the time to do something as all-consuming as this, and you've done it well.

Enjoy it!

Ellis

Re: Kitchen Update

#12

Re: Kitchen Update

Brent Smith in Montreal

>Looks great Jim!!! It's good to see that all that pen spinning hasn't ruined you for flat work :-).

Re: Kitchen Update

#13

Re: Kitchen Update

Jim Shaver - Oakville, Ont, Canada

>Thanks Brent,

I know, it's a delicate balance of expense vs passion....

Take care,

Jim

Re: Kitchen Update

#14

Re: Under counter lights

Jim Shaver - Oakville, Ont, Canada

>Hi Terry,

What did I learn? :-)

I'll get to that, the lights I used are made by Illume, they are xenon and made in Canada (est lamp life of 5000 hrs).

I learnt that a stud finder can find more than studs, I used it a ton to locate wires etc, saved some drywall. Since this project also included overhauling and gutting 3 bathrooms and a laundry room I also learnt that the kitchen reno was the most intrusive one of them all, do the bathrooms first. I learnt it's good to hire out when you need to do that, I hired a contractor to work with me an d between the two of us I think we worked well together and complimented our styles. Have a firm idea on materials and plans, doing your home work pays off, in a bathroom the details are important and often the plumbing hardware defines the material choices. Work with suppliers to let them know what you need and the scope of the work and demands coming, often they will go out of their way to get you what you need and on time if you work with a good sales person, even price breaks on a larger commitment to an order. I hate doing drywall. measure twice..., a few extra tiles is cheaper than driving to London Ont to buy the last of a lot number when you make a mistake. Vanities from Rona all come from China and the porcelain bowls are not standard size when you try to replace the one you broke when you dropped a tool into the basin while hanging a mirror. Avoid black granite, it shows every water spot. When your neighbours come to look, tell them it will cost them twice what you paid etc if they want you to come over and do it for them. Buying faced wood from HD is expensive, but quick in a pinch. I love my 6 foot level. Caulking is your friend. I don't do electrical.

So what did I learn, hmmm, well some of that and my line of credit is at 2% and well used.

Hope that helps,

Take care,

Jim

Re: Kitchen Update

#15

Re: Very nice, Jim. Congrats.

Fred Davis

>Jim,

let me echo Ellis on kudos for your redo .

BTW , how long did your wife have to wash dishes in the bathtub?

Amazing how important that little item is to a home and few don't think about it , until it's gone, waiting for the new one ;-))

FredD