We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My opinion? You'd be better served with a canister such as the G0548.
You would get a lot of air flow out of the G1030 - but it has bags. You are going to get a lot of particulates "hosing" through those bags. You could replace the upper bags with Shaker Felt or similar bags and line the lower bags with plastic bags. That would be an improvement. Alternatively you could get a canister type filter DC or a cyclone.
I prefer a cyclone myself - but they aren't inexpensive - even if you build one.
Dave Bair, Eaton Rapids, MI------WebKitFormBoundar
Dave Bair, Eaton Rapids, MI------WebKitFormBoundar
Guest
Re: Jet canister filter
Dave Bair, Eaton Rapids, MI------WebKitFormBoundar
>I replaced my shaker felt bags with Jet's canister filter about two years ago. I've had no problems with the beater bar cleaning the filter and I've never had to resort to compressed air to get it clean enough to function. I do have to open two gates to keep from sucking all the chips out of my trash can cyclone attached to my planer.
>Thanks, Dave. I'm trying to decide now between the Jet 1100 canister at 1100 CFM and 1 and 1/2 HP or the Grizzly G 0548 canister type at 1700 CFM and 2 HP. I can save about a hundred bucks by going with the Grizzly. Any opinions?
>I've only bought small tools from Grizzly, so I don't have any basis for comparison. I do know that Jet's warranty is much longer than Griz's but I don't know if it's worth $100 to you.