Bleaching pine
Lee Ohmart
>I have a camp finished in traditional knotty pine with ceilings that were never insulated or finished. I've been thinking about insulating so when I'm out there in the winter I'm not just melting snow off the roof with a woodstove. I've seen some camps where they used sheetrock painted white and it reflected light well but just looked a little too stark to me. Others have used the same knotty pine on the ceilings as they did on the walls which, to me, is too much of a good thing and really sucked up light so the camp had a dark feel. A buddy of mine sawed up some hackmatack and pickled it for a ceiling in his kitchen which looked fairly nice to me and reflected light really well but the powdery aspect of the pickle wash obscured the grain somewhat so it wasn't exactly what I wanted. A recent article in a supplement to American Woodworker discussed bleaching wood and touted how this leaves the grain exposed unlike pickling stains. I did little research on line and one web site listed pine as a wood unsuitable for bleaching as it left it looking lifeless. I'm going to pick up a small amount of two-part bleach to see how a piece of pine looks after treatment. It should be interesting to see what the knot look like. The camp has cathedral ceilings in the front part which is a kitchen/dining/living room area. Only in the bedrooms and the bathroom are they at the standard height. My thinking was that at these distances, the lifeless look imparted by the bleach should not be very noticable and the lightened wood should reflect light well. A water based flat polyurethane would be my choice of finish. Have any of you tried this? If not, does my approach sound reasonable?



