Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Mortise machine

Posts

Mortise machine

#1

Mortise machine

DP

>Never having used a mortise machine, is it common to get a little bit of rubbing noise between the bit and the chisel? I've double checked the bit to make sure it's not up into the chisel too far, so I assume the noise is coming between the flutes of the bit in the chisel. Any opinions or comments would be greatly appreciated.

Thanks, Danny.

Re: Mortise machine

#2

Re: Mortise machine

Jim Toews - Walla Walla, WA

>Danny,

I have a slow-speed Jet mortiser, and it can squeal like a banshee. I give it a shot of spray lube periodically. It seems to help. An old friend of mine used to use kitchen spray ("pam" is one brand), and he swore by it; it quieted my bits, but it also smoked like crazy once in a while. I do not like mixing woodworking with processes that generate too much smoke: makes me nervous. In any case, I hope this helps.

Cheers!

Jim

Re: Mortise machine

#3

Re: Mortise machine

Fred Davis

>If your clearence is right , the thickness of a dime, and it still screams , try Clico bits and their brace operated sharpening hone.

You will be glad you did.

FredD

Re: Mortise machine

#4

Re: Mortise machine

Pete in Holland, MI

>Same problem with mine. A little WD40 (cause it is handy) shot into the bit every few minutes helps. Keeping the thing drilling also helps.

Re: Mortise machine

#5

Re: Mortise machine

Dave Bair, Eaton Rapids, MI

>Those skinny-shanked, deep-fluted bits tend to run out a little, especially in the smaller sizes. If you have run-out, you can probably straighten the bit by hand and reduce the scraping noticeably.

Re: Mortise machine

#6

From the expert *LINK*

Bricofleur

>Danny,

If you are a member of Fine Woodworking.com you will find a video and a related article from Roland Johnson. If you're not a member, you may try their free 14 days trial. He particularly states that using Dry Cote spray helps limit the friction. Beside that, it's a very interesting article.

This tool is unique and I believe it takes years to master it. Since I'm too young and don't have enough experience with it, this is the last tool I use when milling mortises.

My name is Serge and I'm a routerhaloc!

Best,

Serge

www.atelierdubricoleur.spaces.live.com


Master The Mortiser