Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Making tapered boxes

Posts

Making tapered boxes

#1

Making tapered boxes

Gary Evans Tallassee, TN

>Hi all,

I have a couple of projects in mind that require tapered sides. I did one of these a long time ago and figured out at that time how to calculate the angles.

Of course any knowledge not used is subject to auto-deletion, so I am going to have to figure out again how to do the compound angles.

Does anybody have a link to a primer on the subject?

Gary

Re: Making tapered boxes

#2

Re: Making tapered boxes *LINK*

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Here is a link from another site that you may find helpful, but you probably can find one here as well.


http://www.woodweb.com/knowledge_base/Bevel_Cuts_f

Re: Making tapered boxes

#3

Re: Making tapered boxes *LINK*

Ed Mulligan, Cape Cod

>More calculators. Take a look at Polycut by John Mcgaw who posts here on Woodcentral.


Compound Angle Calculators

Re: Making tapered boxes

#4

See the "References" section at left

John M in Mid Mich

>This is yet another example of reference information that would be nice to be able to find when you need it without long slogging through Google search or whatever. I wish WC had a top level menu selection for "Reference Info" with summary pages that point to the links like shown here. I could imagine, for starters, pages on:

-multi-angle cuts

-plywood layout

-wood species dimensional movement

-standard furniture dimensions (e.g. chair seat to floor)

-finish characteristics

-pilot hole sizes for wood screws

I know that some (all?) of these are covered in one way or another in the Articles section, but again, it doesn't seem that easy to find when I need it. Just my humble opinion.

Re: Making tapered boxes

#5

Re: Making tapered boxes

Greg Evans Young

>Hi Gary, I'll be a primer.

Engineers are taught to go back to first principles if they don't understand something rather than looking for a discreet solution.

Anything that is tapered can be broken down to right angle triangles

and easily solved using Pythagorus, "the square of the hypoteneuse is equal to the sum of the squares on the other two sides."

By far the easiest way to do anything like this is to learn the very most basic trigonometry, (please believe me, it's only a bunch of ratios of the sides of triangles and not difficult at all.) "SOHCAHTOA" - SIN=OPPOSITE OVER HYPOTENEUSE, COS=ADJACENT OVER HYPOTENEUSE TAN=OPPOSITE OVER ADJACENT. Spend a little time on this and you will never puzzle again over a tapered leg, an obelisk, a trophy base or a hipped roof.

A book that I think every woodworker and carpenter should have is,

"Construction Geometry" by Brian Walmsley, it is in print but deals only with geometric solutions.

Hope this helps.

Please don't think of me as some kind of pedantic jerk; I am a serious woodworker and this is one of my pet causes.

Re: Making tapered boxes

#6

Re: See the "References" section at left

Ed Mulligan, Cape Cod

>John,

WC does have a search function in the articles section. Search on compound angle and a list of hits is generated.

The down side of a 'references' section is that someone has to maintain it and troll the internet for better material that is being produced endlessly and constantly.

Ed