Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Router Table Angled Dado Jig *LINK*

Posts

Router Table Angled Dado Jig *LINK*

#1

Router Table Angled Dado Jig *LINK*

Bricofleur

>Milling angled dadoes, angled sliding dovetails and angled rabbets have always been a challenge. I use these joints when building ladder bookcases, louvers, railings and several decorative elements. I've always found the setup quite complicated and time consuming. Some joints would be easy to mill with a radial arm saw, but what do you do when there's not such a saw around ? I finally came up with an easy solution with this adjustable sliding jig to be used on the router table.

To use the jig as it is, the edges of your router table must be parallel. If they aren't, I suggest you making the sled about 6" narrower so it could slide between two 3" guides rails C-clamped parallel near the edges of your router table (I did that before making this final sled, but the setup takes more time).

A great addition to my workshop.

For all the details and more photos, click to be linked to the specific page of my website.

Best,

Serge

www.atelierdubricoleur.spaces.live.com


img

Router Table Angled Dado Jig

Re: Router Table Angled Dado Jig *LINK*

#2

Re: Router Table Angled Dado Jig

George@Colonel's Workshop-Havertown PA

>Good Evening Serge,

Grease thru a goose couldn't be slicker! :<)

George

Re: Router Table Angled Dado Jig *LINK*

#3

Re: Router Table Angled Dado Jig

Bricofleur

>Good evening George,

I don't really know the exact meaning of what you said, but I believe it's positive!!! - LOL - Thanks.

Best,

Serge

www.atelierdubricoleur.spaces.live.com