Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

powder post beetle

Posts

powder post beetle

#1

powder post beetle

sdown

>hello all i used to contribute and read the the fourmns all the time but than i had three kids in a 5 year span so i dont spend as much time doing wood related endevors... anyhow i reintroduced myslef to my shop and am going to buld a hutch looking tv/audio cabinet. so today i was looking at some ofmy oak stash that has been laying around for ten years and it has ppb activity. does any one have an idea on how to heat up this wood to 140 deg. for 24 hrs to kill them?

Re: powder post beetle

#2

Re: powder post beetle

Barry Irby

>Depending on the size of the pieces and your location you may be able to put them in black plastic bags and lay them out in the sun for a day or two. You could make a quicky solar kiln out of plastic sheeting (polyethelene).

You could find a local kiln operator and see if they would run them trough a cycle for you.

And you might be able to treat them chemically, as in gas them in the above mentioned bags or kiln, but I am not sure what I would use.

Re: powder post beetle

#3

JL

Re: powder post beetle

JL

>I would try to find someone with a kiln - or possibly try a solar kiln.

Another thought is sealing the lumber in plastic bags (outside) and placing lots of dry ice in the bags with the lumber. The CO2 acts to suffocate the powderpost beetle larvae. The CO2 will dissipate when you open the bag and the lumber will be safe to work with. Boracare (sp?) is also supposed to work on powderpost beetles, carpenter ants, carpenter bees, etc. But it is a chemical and you will be working on the wood after treatment.

Re: powder post beetle

#4

not to worry mates

Bill Tindall, E.TN

>If the lumber has been stored that long they have done their deeds and they are long gone. In my experience they come and go fairly quickly and don't come back for left overs.

I don't want to miss an opportunity to suggest chemical warfare. If I had an active infestation I would (and have) drown the lumber in any volatile solvent, with acetone or ethyl acetate preferred, being mindful of fire issue. The vapors will get them. So will a volatile pesticide.

I have not tried it but I will bet that wrapping the lumber in plastic and adding moth balls would similarly do the job. Doing it in the sun where the moth balls would vaporize better would improve the killing. Or throwing in a bug bomb or two will do the job, based on my experience.

Re: powder post beetle

#5

Lee Grindinger

I suspect you're right

Lee Grindinger

>If you're seeing "signs" of PPBs it's most likely frass falling from exit holes meaning the buggers have flown. It's nearly impossible to detect current infestations without a stethoscope, one nickname for then is "Deathwatch Beetle" because late at night during deathbed vigils when all was silent the munching could be heard, I hear it here often in the tropics.

Also, Anobiids are the only one of the PPBs that can convert the starch in lumber to sugar below 10% or 11%. If your lumber's moisture content is at or below these levels you needn't worry. The other two borers known as PPBs are not able to survive in lumber below 12% MC.

Lee

ps. The active chemical in Boracare and Timbor, the two popular chemical treatments, is borate, a substance we need to survive. Although lethal to insects there is no evidence it's harmful to humans in the doses you'd get using lumber treated with these products. There is an argument to be made it's actually beneficial.

Re: powder post beetle

#6

I *think* ditto on acetone

Grant in Iowa

>When I was in high school Biology, we "offed" many a bug (we weren't allowed to call them "bugs" in front of the Biology teacher). using a cotton swab soaked in Acetone so we could make the required insect collection. Works fast... maybe make up a plastic tent outside on a calm day, place the suspect wood inside along with a rag soaked in acetone. Seal up the tent and let bake in the sun for a few hours to make sure it penetrates all the cracks, crevices, and tiny D-shaped holes.

As a side note, back to the bug collection assignment: I completed the assignment with the exception of finding an insect from one of each of the phylums in the insect kingdom. The instructor told us that we HAD to have an insect from each phylum to pass. The missing phylum for me was "hymenoptera", of which a "lacewing" was the only common member in our area. I spent weeks running around gardens, weed patches, and back yards searching for a "lacewing" with photo in hand. Never found one, but the instructor passed me anyway.

To this day I can still spot a lacewing from a good distance...part of me is still searching for them at all times. If I ever see one when in the presence of others, I point proudly and proclaim "LACEWING!, FROM THE PHYLUM HYMENOPTERA!". An image of the professor from Gilligans island will usually simultaneously pop into my head. The lesson here is that failure can be a great learning tool.

Anyway, Actone will kill bugs pretty well in some concentration is the point...

Regards,

Grant in Iowa


img

Re: powder post beetle

#7

Re: I *think* ditto on acetone

sdown

>what i have found is frass in my wood. will putting the machined parts in a bag with acetone kill the egs and larva that the emerging adults surely left behind?