Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Church Pews

Posts

Church Pews

#1

Church Pews

mdclor

>Good morning to all,

My brother's church is replacing their pews. Is there enough usable wood in pews to make it worth the trouble of salvaging them? I haven't seen them or any pictures. The species is unknown at this time, but it is a tight grain. I normally make larger projects like end tables, blanket chests, night stands, etc, but will be making some mission style clocks for Christmas presents.

TIA,

Merle

Re: Church Pews

#2

Re: Church Pews

Jerry Gibbs

>a typical wooden pew would have curved seats and backs, which would reduce the amount of usable wood. Jerry Gibbs

Re: Church Pews

#3

Re: Church Pews

Ed Mulligan, Cape Cod

>A customer once brought me some salvaged pews and asked me to make short benches from them. The benches came out nice.

Re: Church Pews

#4

That Was My Experience

George@Colonel's Workshop-Havertown PA

>Good Morning Merle and Jerry,

Plus I found that they were veneer. Shortening benches may be an option for you. Pews which I have had to repair and work on would have yielded little usable lumber. But, you have not yet seen the pews in question. Take a look. Maybe they are worth your time.

George

Re: Church Pews

#5

Re: Church Pews

Chuck in ND

>I have refinished alot of antique furniture, and we have a 8 ft oak curved church pew in our home. If they are really old such as the one we have, I think it would practically be a sin to chop them up.

Re: Church Pews

#6

Re: Church Pews

Charlie Self

>That takes me back: something like 55 years ago, I worked in a place called Katonah Altar Factory. I was the gofer/clean-up guy, but I saw that a lot of what went out of there was oak, often white oak, and often 8/4 base stock, meaning the finished pews were probably down to 5/5 or a bit thicker.

A lot is going to depend on the area (Katonah is northern Westchester in New York State), and the time. Affluent areas back then almost always demanded solid wood church furniture. Less wealthy areas might see some pine, or some veneer...and if wealthy areas went into really exotic woods, a lot of that would be veneer.

About all you can do is check the pews for seat thickness, back and seat curvature, that sort of thing. End cap carvings also reduce available woods.

If the pews are solid oak and the price is right...go for it.

Re: Church Pews

#7

Re: Church Pews

mdclor

>Thanks for all the input. Now I have a much better understanding of the possibilities.

Merle

Re: Church Pews

#8

Re: Church Pews

Dick Coers

>If you are so inclined, this may be a good business idea. Shorten pews, use the cutoffs for small projects, (even down to wood pens, then sell them back to the parish. Nostalga is a great marketing tool.