Lacquer burn in stick info needed
mckay
>I damaged an edge of QSWO ply and I need to repair the pulled up fibers. Has anyone any information about how to properly use a burn in stick? Any help would be appreciated.
Knowledge You Can Build On — Est. 1998
Lacquer burn in stick info needed
mckay
>I damaged an edge of QSWO ply and I need to repair the pulled up fibers. Has anyone any information about how to properly use a burn in stick? Any help would be appreciated.
Re: Lacquer burn in stick info needed
Barry Irby
>On Wed. there was a post about repairing a deep gouge in a table. Someone posted a link to Taylor Tools (http://www.taylortools.com/wooddoctor.html) that had a video of using their kit to repair hardwood floor. Their burn in sticks were not listed a shellac but appeared similar and it appeared the technique would be similar. There is a YouTube video embedded in the link. Shows one being done.
I have a kit from Mohawk that was designed for furniture repair and has a burn in knife and many shellac sticks. I got it about forty years ago when I was in college thinking I would earn a few bucks and I did, but it has been about that long. If I wanted to do it again, I would Google Mohawk and see what they offer now.
I would also go to YouTube and search for furniture repair, and burn in sticks and whatever. I would bet Mohawk or Furniture Medic or one of the others will have videos.
I use these sticks often
Bill Tindall, E.TN
>Mohawk has a helpful video.
I found that a temperature controlled knife is essential. Melt some stick on the knife. Press melt into the depression and then push on repair with finger to squeeze out any bubbles. Sand smooth and apply finish.
advanced technique involves doing repair on a finished piece using some stuff that prevents stick from adhering to finish, a leveling solvent, etc. People that are experienced can make a near invisible repair.