Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Unsure about new Steel City experience

Posts

Unsure about new Steel City experience

#1

Unsure about new Steel City experience

Mike in NC

>Well, just purchased the Steel City 17" Drill press about 2 weeks ago. I was quite impressed with the quality until last night. I was drilling a few 1/4" holes in 3/16" steel when I hear a loud pop and see a flash of light, simultaneously. I shut the machine off and check for the cause, thinking maybe the power cord was pinched or something and caused an arc, but found nothing. This happens 2 more times, each time a louder pop and brighter flash, and each time shutting down and checking for the cause. By the fourth time, I notice the flash is coming out of the bottom of the motor and notice smoke coming from it. With some minor surgery, I found the capacitor (I guess is what it is) connected to the motor looked almost melted and you couldn't touch the motor for the heat.

Fast forward to today. I call the 877 number in the manual and get some guy's voicemail telling me to leave a message and I will receive a reply within 24 hrs. I would think if a company prints a number in a manual and posts it online that it would go to that company's office, not some salesman's voicemail.

Anyone else have an experience like this with Steel City? Should I be concerned with the quality of my new purchase?

Re: Unsure about new Steel City experience

#2

JL

Re: Unsure about new Steel City experience

JL

>I have their 5 hp cabinet saw and their 8" jointer. When I called with questions or emailed a query, it was answered in a timely matter.

I would say try again. I talked and emailed with the technical people.

Re: Unsure about new Steel City experience

#3

Re: Unsure about new Steel City experience

Jesse Cloud

>I had the same experience that JL reported. When I was assembling and tuning my new bandsaw, I made a real pest of myself, called four times in one day. Three out of four times the phone was answered right away, the fourth time I got a call back in a few minutes. The guy on the other end clearly new the product well and gave excellent advice.

Don't give up yet.

BTW, I had the same problem with a capacitor on a Delta drill press. Should be an easy fix, just be sure to note where the different color wires attach and connect the new one the same way.

Re: Unsure about new Steel City experience

#4

Re: Unsure about new Steel City experience

Chuck in ND

>If the motor got that hot I don't think I'd just settle for a new capacitor. I'd be asking for a new motor. This is the first time I've heard of a 17" SC drill press problem, but then again I haven't been looking lately either. The last I seen, the press was rated pretty highly.

Re: Unsure about new Steel City experience

#5

Steel City Update

Mike in NC

>Thanks for the responses. They kept my hopes up as I ended up playing phone tag with the rep. Turns out, they are going to just send me a new motor "no questions asked". In conclusion, they'll continue to earn my respect, just as Grizzly did a few years back in a similar situation.

Re: Unsure about new Steel City experience

#6

Re: I will say one thing that concerns me about SC

Chuck in ND

>The way they label their tablesaws I think is a bit decieveing. You really need to do your homework before buying one. Just because they say it's a Cabinet saw doesn't mean that it's a traditionally Industrial built Cabinet saw, many are Hybrids or light duty cabinet saws, and a few are traditionally built Industrial Cabinet saws. They may fool some people, but to me it lessens their integrity. I think it's really a bad move on their part, call it what it is. Other than that, I think their stuff is ok. Just my opinion.

Re: Unsure about new Steel City experience

#7

Re: I will say one thing that concerns me about SC

Fred West in West Chester, PA

>Chuck, I must say that I have not really looked closely but was very much wondering how a "cabinet saw" was being sold brand new at $649. Your thoughts helped me so thank you, Fred

Re: Unsure about new Steel City experience

#8

Re: I will say one thing that concerns me about SC

Chuck in ND

>Fred, from what I can tell, a indicator of which saw is which is the motor cover.

Re: Unsure about new Steel City experience

#9

Re: I will say one thing that concerns me about SC

Chris Friesen

>Agreed. They're calling anything with cabinet-mounted trunnion a "cabinet" saw.

In my view, a true cabinet saw also has a fixed belt tension rather than relying on gravity to tension the belt. The advantage of this is that the belt tension doesn't change when tilting the blade.

Re: Unsure about new Steel City experience

#10

Re: I will say one thing that concerns me about SC

Chuck in ND

>Before someone jumps me on it, the guts of the machine, and the size of the cabinet are different also.

Re: Unsure about new Steel City experience

#11

Re: I will say one thing that concerns me about SC

Chuck in ND

>Yesterday I had a pleasent and fairly lengthy discussion with a gentleman at Steel City concerning the confusion of their table saws. He told me it would be brought up at their next meeting. It will be interesting to see what they come up with.