Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Need ideas for a finish

Posts

Need ideas for a finish

#1

Need ideas for a finish

Fred West in West Chester, PA

>I am in the process of building a Greene and Greene side table. However instead of using the more traditional woods I am using some beautiful Paduak I have had sitting in my basement for the last nine years. I just finished hand planing the four legs and the orange color is so warm though I know that it will brown up little as it ages.

My question is what type of finish would you all think might be the best. A couple of things to keep in mind and the first is that I would like to preserve the natural beauty of the wood as much as possible and the second is that the wood is a bit toxic so I need it sealed fairly well.

Thank you in advance, Fred

Re: Need ideas for a finish

#2

Re: Need ideas for a finish

Clint Searl, at the base of Haycock Mtn

>Nothing will prevent paduak from extreme darkening, so the best finish is a water white solvent lacquer.

Clint

Re: Need ideas for a finish

#3

Re: Need ideas for a finish

jerrymayfield

>I have used both orange and garnet shellac on that wood . Turned out fine.

Jerry

Re: Need ideas for a finish

#4

Re: Need ideas for a finish

Fred West in West Chester, PA

>Clint and Jerry, thank you very much for your thoughts. Did either of you use SealCoat or anything like that in addition to the lacquer or shellac? Also, I am leaning toward not sanding at all and only planing and scraping. Does this change your thoughts? Fred