Steamed vs non steamed
Lee Grindinger
>The late and great Jon Arno and I went around and around on this one.
I used to operate two low temperature lumber drying kilns in upstate New York. I dried a lot of walnut, never steaming it. I'm also a retired furniture maker having used thousands of board feet of steamed walnut. My point is that I have a bit of experience with both.
For most work I preferred steamed. While the colors in non steamed low temperature dried walnut are bright, vivid and beautiful they are transient. UV light dulls these colors relatively quickly depending on it's exposure levels. Do this test yourself, take a vividly colored scrap of non steamed and put it in the direct sun for a few days.
Steamed walnut for me did not make the sapwood usable, it made matching the heartwood easier. Matching the heartwood in unsteamed requires a lot of attention and is quite challenging in large projects using several hundred board feet of lumber. It's a piece of cake in smaller projects using only a few boards but large projects present real problems. I liked the uniform appearance of steamed walnut for many applications.
Your challenge has been created by mixing the two, I'm guessing you didn't have enough unsteamed walnut to do the job and filled in with steamed. The problem you may encounter down the road is that the unsteamed portions of your project will lighten while the stained-to-match portions will not. Consider finding some unsteamed lumber for your needs, Woodfinder can provide you with plenty of options and it may just save you a lot of disappointment and aggravation come finish time.
Oh, and Jon finally conceded to this hot box jockey on this issue,
Lee