Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

grizzly jointer

Posts

grizzly jointer

#1

grizzly jointer

Walt

>Grizzly is having a special offer on their 8 in. jointer, G0586, for $595. I was thinking about buying Delta 8 in. jointer for $1300. My question is would I be disappointed in buying the Grizzly over the Delta?

Re: grizzly jointer

#2

Re: grizzly jointer

steve mackay

>DDon't know about the jointer but I've got the combonation sander and contractor's TS. Love 'em both. Best by for MY money !

Re: grizzly jointer

#3

Re: grizzly jointer

Howard Norman

>I don't know about the Grizzly jointer that you are considering. I have the 0490 jointer and have been very satisfied with it. Mine was in the first shipment of that jointer from the PRC and there was damage in shipment. However, Grizzly took care of it and changed shipping procedures, as I understand, to prevent the problem from occurring on future shipments.

Re: grizzly jointer

#4

Re: grizzly jointer-you get what you pay for

mike from american sycamore

>I have sold tools for over 25 years and have probably sold over 500 Delta jointers. They work well and will hold there value. I use a Delta 8" jointer just about every day. It is a pleasure to use. You are not saving money with the other jointer, you are just getting a machine that was made to sell for a lower price!

Re: grizzly jointer

#5

Re: grizzly jointer-you get what you pay for

Kirk (KC) Constable

>Of course he'd be saving money... and a lot of it. People buy Chevrolets, people buy Cadillacs. Both get the job done.

Re: grizzly jointer

#6

You're Both Right

David Yoho

>I believe I understand what Mike was saying - You are not saving money with the other jointer, you are just getting a machine that was made to sell for a lower price! The only "savings" then would be what was spent for one versus the other. In my mind this always brings up another question - is this money well-spent?

I think Grizzly machinery is good stuff - I owned one of their contractor tablesaws for a number of years and don't have anything bad to say about it.

To your point, both jointers (Delta and Grizzly) will get the job done. But I think it's like the discussion earlier on this board about spiral cutterheads. Both types of jointer or planer heads will get the job done but it's the degree of accuracy, finish, or ease-of-use the higher costing alternative delivers that negates the cost difference.

I've owned different brands of power tools through my years in woodworking. When I first got started many of my tools came from Sears. They got the job done, too. I remember my first Porter Cable router (690) and the experience and feel of using it for the first time. Wow, what a difference it was and made from what I had been using. Later when I upgraded to my Jet cabinet style tablesaw, as highly as I regarded my contractor saw, the Jet showed instantly why the cost difference was worthwhile.

So, to the question of saving money - in one sense there is a savings in as much as how much was spent. However, how often do we make a purchase like this based off of budgetary constraints only to end up dissatisfied or wishing we had gone with the higher priced choice in the end? Been there - done that!

The saying - You get what you pay for has merit here. My suggestion is to always buy as much tool as you can possibly afford.

David

Re: grizzly jointer

#7

Re: grizzly jointer

mdclor

>Walt,

I have the G0593 and am very happy with it. However, I haven't used a Delta, so I can't provide any comparison. I would encourage you to consider the spiral head which ever way you go.

HTH,

Merle

Re: grizzly jointer

#8

Re: You're Both Right

Chuck in ND

>Always buy as much tool as you can possibly afford. I hear this all the time, and while it may hold true in some circumstances, in others it may not. I think your best bet is to start reading some reviews on Jointers and go with what your comfortable with.

Re: grizzly jointer

#9

Re: grizzly jointer

Dave Bair, Eaton Rapids, MI

>Don't know if you'll be disappointed but you might want to check the warranties. Grizzly comes with only a one-year promise. Grizzly will provide you with the name of a nearby customer of their's who bought the machine if you want to check it out in person.

Re: grizzly jointer

#10

Re: grizzly jointer

Dan Mitchell

>Here's a FWW write-up on the machine from their Winter 2005/2006 issue. Sounds pretty good, but I think one thing more expensive machines may have over cheaper ones is consistency; could be the tables/fence won't be as true on the example you receive. If that's the cae, it can be a real PITA (I had a 6" Delta jointer with a warped fence, the replacement they sent was worse. Put me off the brand permanently). A jointer is one of those machines that has to be "perfect"; if you get this one & everything is nice & flat & able to be tweaked into proper alignment (in my experience, even higher $$$ machines are rarely all they can be out of the box) then I'm sure it's a fine machine. Of course, spending more is not a guarantee of perfection, but I think if I had the $1300 to spend on a jointer, I'd probably go a bit up-market.

Dan


img

Re: grizzly jointer

#11

Re: grizzly jointer

Bill White

>Since I don't have either a Delta or a Griz jointer, I'll just jump in with some generalities. The two Griz tools I own (G0444Z TS and G1067Z lathe) are every bit the tools I expected, needed, and wanted. Price/value relationships are relative to the expectations of the purchaser. The 1952 Craftsman DP I bought for less than $100 will last for as long as I need it.

One last thought.....I know the name of the Pres. of Griz, and wouldn't even know where to start finding who runs the Delta division of whatever entity owns/runs all the associated brands.

Let's see...HMMMMMMMM? Mr. Porter-Cable-Delta-DeWalt-Skill?

Bill