Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Liquor cabinet

Posts

Liquor cabinet

#1

Liquor cabinet

Thomas S Stockton

>This is a liquor cabinet I just finished. A client saw a sideboard I did in a gallery and wanted a small cabinet in a similar style. They wanted it to be flexible so the only thing that really makes it a liquor cabinet is their intended use and the wine rack I built. The piece is made of curly sapale, ebony and mother of pearl.


img

Re: Liquor cabinet

#5

Liquor cabinet - Wow!

Bricofleur

>What a great job! And a great cabinet!

Congrats. I like everything in it: The shine, the wood grain, the profile, the dimensions, the inlays, the curves, the color. I particularly like the inlays in the doors and drawer. I thought they were the shadows of the insets.

It must cost a lot to get one of these!!!

PS: One thing I don't like though. The wine bottles are fake (empty) LOL

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: Liquor cabinet

#6

Re: Liquor cabinet

Curtis Gray

>Stunning! Great work

Re: Liquor cabinet

#7

Re: Liquor cabinet

Victor Parisian

>Outstanding job. The grain, the finish, the inlays. Gorgeous, well done.

But where's the hooch?

Victor

Re: Liquor cabinet

#8

Elegantly understated

Clint Searl, at the base of Haycock Mtn

>

Re: Liquor cabinet

#9

Re: Liquor cabinet

Fred Davis

>The bow front and curved bottom really set's this piece above strictly rectilinear.

The attention to flow of grain down the front is very good, dang wish I had done it.

FredD

Re: Liquor cabinet

#10

gorgeous wood. stunning piece.

Tom Sontag - St. Louis

>

Re: Liquor cabinet

#11

Re: removable wine rack

HC Sakman --- Victoria,BC. CANADA

>Simple and elegant Tom. Nicely done. I like the details as usual, they distinguish your piece. Wood is figured yet not overwhelming the whole thing despite the fact it's used everywhere. That's where the keen eye/artistry and experience comes in.

Well done.

Chico...

Re: Liquor cabinet

#12

Ellis Walentine

Inquiring minds want to know

Ellis Walentine

>Very tasty, Tom. There's something Ruhlmanesque in the form and it comes across very nicely in the curly sapele. I had a question about the fronts (doors, drawer front). What did you laminate for the core, and did you include your face and backer veneers in the initial sandwich or were they added in a second glueup?

Ellis

Re: Liquor cabinet

#13

JL

Re: Liquor cabinet

JL

>I love the wood. It complements the design so well.

Re: Liquor cabinet

#14

Now there's your problem...

Jim Toews - Walla Walla, WA

>Somebody drank your wine! At least you have stunning cabinet to keep the empties in! Beautiful work!

Cheers!

Jim

Re: Liquor cabinet

#15

Re: Inquiring minds want to know

Thomas S Stockton

>Ellis,

The core was 1/4 bending luan in the middle with 2 pieces of bending polar on the outside.

Bent the core first then cut it up into the various parts. I then edgebanded the pieces with 1/4 lumber and pressed the veneer on.

Tom

Re: Liquor cabinet

#16

Re: removable wine rack

Barry Daniel

>Nice job on the cabinet. Could you give me some measurements for the wine rack? I have been building a cabinet myself, and I stuck on the bottle rack. Thanks.

Barry

Camden, NC

Re: Liquor cabinet

#17

Re: removable wine rack

Thomas S Stockton

>Basic diemensions are each opening is 3 1/4 square the angled holders are 1" wide with a 45 degree angle. I think the overall length is 12 1/2". It was designed to hold both regular bottles and smaller desert type wine bottles. The only bottle I found that it didn't fit was very wide at the top and tapered, but that bottle will fit on the top rack. Here is a little better picture.

Tom


img

Re: Liquor cabinet

#18

oh yeah

Thomas S Stockton

>And the joinery was extremly complicated, 23 gauge pins and glue. I made very simple jig to keep things square.

Tom

Re: Liquor cabinet

#19

JL

45 degree bevel

JL

>on the inner portions?

Re: Liquor cabinet

#20

Re: removable wine rack

Barry Daniel

>Thanks for the info and picture. I was working on mine today, I made the opening 4" square with half-laps at the intersections. I might add the angle parts to keep the two grids together.

Barry.

Re: Liquor cabinet

#21

Re: Liquor cabinet

Thomas Skaggs, Foothills of Mount Level

>Wonderful piece Tom. The simplicity of form really helps show off that Sapele wood. Great job and design. T.

Re: Liquor cabinet

#22

wow, that is a beauty

MARK VALSI FROM PASADENA CA

>Man, that is a wonderful project !!

everything about it, proportions, wood choice, finish, inlays

YOU DONE GOOD !!!