Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Makita joiner/paner

Posts

Makita joiner/paner

#1

Makita joiner/paner

Edward in Vancouver

>Was at a local tool shop the other day and noticed a Makita joiner/planer on consignment, had been there for some months and the current price was around $600. This is a 6" joiner with what appears to be a 48" bed and I think, a 13" planer. It's old. So old it's painted battle-ship grey (original paint) and looks to be substantial cast iron.

Now, I don't have the space and probably not the cash for this, but it still seems like a bargain, which makes me suspicious as to why it had been sitting there for 5 mths (starting at over $1,200) and no one snapped it up.

Any comments out there?

Re: Makita joiner/paner

#2

Re: Makita joiner/paner *LINK*

Grant in Iowa

>Edward,

I have seen these go used for between $300 and $500. They seem to be a nice machine. Check out the link below for a review by someone who has had one for 10 years or so...

Regards,

Grant in Iowa


Makita planer thread

Re: Makita joiner/paner

#3

Re: Makita joiner/paner

Thomas S Stockton

>There are two versions of that machine one with two post and a newer one with four posts supporting the planer. The one thing that does go bad is the feed rollers, which get gummy and need to be recovered. Costs about $200 and they use a grade of rubber that won't go bad.

I found a newer style one for my brother for $500 which seems to be the going rate.

Tom

Re: Makita joiner/paner

#4

Re: Makita joiner/paner

Greg Young

>I had one & used it for years - it was wonderful, it's not fast though.

The only downside was the rubber feed rollers in the planer; if you use it alot they will need to be replaced every few years.

The jointer is 5' long. If it works now I would buy it.

Re: Makita joiner/paner

#5

Re: Makita joiner/paner

Edward in Vancouver

>Thanks gentlemen. Now I just have to convince my little lady that I actually need it.....