Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

cleaning rough cedar

Posts

cleaning rough cedar

#1

cleaning rough cedar

Jerry Gibbs

>About 25 years ago we added a room which has a rough sawn cedar ceiling (no finish). During the dry wall installation, I hit the ceiling in several places leaving gypsum imbedded in the cedar. The gypsum (or whatever) is still there. I am now getting around to cleaning it up. I may have tried initially. Any hints? Jerry Gibbs

Re: cleaning rough cedar

#2

Re: cleaning rough cedar

A Wright

>You might try fence cleaner

Re: cleaning rough cedar

#3

Re: cleaning rough cedar

Jerry Gibbs

>what is fence cleaner? Jerry Gibbs

Re: cleaning rough cedar

#4

Re: cleaning rough cedar

Dave Bair, Eaton Rapids, MI

>Brass wire brush, with the grain of course.

Re: cleaning rough cedar

#5

or maybe

Dan Donaldson

>a small sand blaster. You can get them fairly cheaply that are good enough for this.

Re: cleaning rough cedar

#6

Dale Lenz

Re: cleaning rough cedar

Dale Lenz

>If the brass brush does not work, I'd try a genric wire brush, like the ones folks use to clean an outdoor grill with.

Re: cleaning rough cedar

#7

Re: cleaning rough cedar

Pete in Holland, MI

>Brushing and maybe also compressed air.

Can always hang a picture there too.

Re: cleaning rough cedar

#8

Re: cleaning rough cedar

George Koch

>Jerry, Have you tried plain water with a household scrub brush?

Re: cleaning rough cedar

#9

Re: cleaning rough cedar

Fred Davis

>While not having your sense of urgency Jerry , I would probably wait until the room decor is changed and use the various suggestions , plus a powerful shop vacuum.

Re: cleaning rough cedar

#10

Re: Wide Crown molding?

Gary Camp, Bend, Oregon

>