Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Kitchen Update

Posts

Kitchen Update

#1

Kitchen Update

Jim Shaver - Oakville, Ont

>Well in the continuing saga of my kitchen renovation I am now almost half way through my list of things to do. I am working in concert with a contractor and between the two of us we keep moving the rock forward.

Since I last posted a few new mile stones have been completed, the ceramic floor is in, wow what a difference that made.

Photobucket

Also all the electrical and plumbing changes that are required are done. I also completed two base cabinets. The configuration of the room does not allow for much latitude in design so I am keeping the same lay out with some modifucations. The biggest change so far was installing a blind cabinet hardware kit from Lee Valley.

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

It opens and allows a trailing set of wire shelves to follow and have full access to. I will say I recommend installing this when the cebinet is not in place and with out a counter top, it was a smooth assembly, but doing it in the dark in the corner in place might just kill you!

The crown is going up and the cabinets are almost all in place now.

Photobucket

Plywood counter goes on tomorrow and my granite guy will be here to measure on Saturday.

Photobucket

Hope you are enjoying this, now where is the Advil..

Take care,

Jim

Re: Kitchen Update

#2

Ellis Walentine

That kit is exactly what I've been looking for!

Ellis Walentine

>Thanks for the tip on the corner storage solution from Lee Valley, Jim. That'll save me a ton of work.

Ellis

Re: Kitchen Update

#3

JL

Thanks for sharing. I like the wire kit also.

JL

>I see that it comes in both left hand and right hand - very good to know.

Re: Kitchen Update

#4

Question - why plywood counter?

Tim Greif - West of Chicago

>Very neat install on that corner kit. You said that you were installing a plywood counter before the granite guy comes to measure. What is the reason for that?

Re: Kitchen Update

#5

Re: Question - why plywood counter?

Jim Shaver - Oakville, Ont

>Hi,

The granite is 3/4" thick and is established on a 3/4 "ply base, that is what my granite guy wants, he wants a dead flat surface to register the granite to, also the bull nose is a double edge giving a 1 1/2" thick look.

Thanks,

Jim

Re: Kitchen Update

#7

Re: Kitchen Update

Rob Lee

>Wow -

Excellent work Jim - I really like the ceramic floor too!

With all the home work you do, you make a lot of the rest of us look "bad"....

Cheers,

Rob

(who just buys lower wattage bulbs each year, instead of renovating.... :0 )

Re: Kitchen Update

#8

Plywood in, PIC

Jim Shaver - Oakville, Ont

>Here is the counter with the plywood in place.

Photobucket

Take care,

Jim

Re: Kitchen Update

#9

Re: Kitchen Update

GalenV in Iowa

>Good looking floor!

The motivation to get this done is measured by how long you can go without home cooked meals. :>)

Galen

Re: Kitchen Update

#10

Well, I must say

Joanne in Pt. Pleasant, PA

>You're an awfully neat worker. Where's all the dust and clutter and debris from construction?! Are these cabinets getting a different look or will they be stained and 'doored' to match the existing family? Are you going to tile the backsplash area?

Re: Kitchen Update

#11

Re: Well, I must say

Jim Shaver - Oakville, Ont

>Hi Joanne,

Lots of reuse going on here, the existing cabinets are all red oak that have been dyed a walnut brown. I have a match recipe that I worked out a while ago so the new doors will match the existing doors with little change. This is not a total overhaul, but indeed a major face lift.

I will be stripping the clear coat and balancing the colour with the old and new, then adding a sealer coat then doing a glaze finish.. I will also be making end panels for the upper and lower cabinets to add a finished look. The shop is smelling like a blend of red oak and melamine right now, funky!

The back splash will be a tumbled travertine that has a soft tone of taupe and sand colours in it. The granite top is going to be an off white grey with quartz veining cross cutting a blend of plagioclase and feldspar with trace biotite and garnets...

Take care,

Jim

Re: Kitchen Update

#12

Re: Kitchen Update

Jim Shaver - Oakville, Ont

>Thanks Rob,

I love the hardware I installed, it was all metric, which is okay with me, but the instructions are only for left hand applications and mine was a right handed set. I think as I age my spacial abilities have changed, I would have enjoyed a right hand set of instructions....LOL..

Looking for more applications to use the LV kitchen sets available as well.

My next kitchen will be a real Craftsman styled kitchen, and I will buy all the LV accessories I want in advance so I can design my work around your products......

:-)

Take care,

Jim

Re: Kitchen Update

#13

Jason Roehl in Lafayette, IN

A question.

Jason Roehl in Lafayette, IN

>How much clearance do you have between the edge of the door of the blind unit vs. the face of the unit to the left of the corner? In other words, how much room did you leave for the thickness of your doors, plus their handles?

I'm just curious, because I see interference issues like this in new homes all the time, usually between drawers and an appliance around the corner. The problem is almost always due to one of two causes: a "carpenter" in a hurry, or a homeowner who can't decide on anything (or tries to micromanage everything with zero experience, but they saw how to do it on HGTV).

Jason

Re: Kitchen Update

#14

Good Eye!!

Jim Shaver - Oakville, Ont

>Hi Jason, Good EYE!!

Yes it was a serious concern for me, the off set of the door to doo is that the pull stops short of the handle by 3/4" and is off set with 3/8" clearence. Yeah I did sweat that detail a lot!

My other option on the handle issue was to go to magnet catches on the sink base unit if I had such a problem.

Thanks,

take care,

Jim

Back to the microwaave cabinet......

Re: Kitchen Update

#15

Re: Well, I must say

Joanne in Pt. Pleasant, PA

>Sounds great. And affordable! Just be careful setting glass things down on that granite. I know folks who have things breaking all the time. Maybe they are just klutzy.

"The back splash will be a tumbled travertine that has a soft tone of taupe and sand colours in it. The granite top is going to be an off white grey with quartz veining cross cutting a blend of plagioclase and feldspar with trace biotite and garnets...

I love when you talk geological! ;-)

Re: Kitchen Update

#16

Fred Told Me, Joanne

George@Colonel's Workshop-Havertown PA

>That geological talk shouldn't be taken for granite. :<)

George

Re: Kitchen Update

#17

Re: Kitchen Update

Fred Davis

>Jim ,

your floor tile is lovely to say the least and everytime I see large tile used on a floor in a picture , I wonder what the substrate is.

FredD

Re: Kitchen Update

#18

The Floor Prep, > PIC

Jim Shaver - Oakville, Ont

>Hi,

The floorbase is a 3/4 ply, the house was built in 1983. The base for the ceramic floor is a mortar and wire mesh.

Photobucket

Took about 24 hours to dry before we put down the ceramic with thin set... not an easy job

Take care,

Jim

Re: Kitchen Update

#19

Colonel, O-Pal, the Schist of it is

Joanne in Pt. Pleasant, PA

>if you're within a Stone's throw of losing your Marbles (like Moi some days!), it doesn't matter what you take for Granite. :-)

Frank sends his regards. He's a gem of a jointer and just a diamond in the rough. He awaits your wide boards.

Re: Kitchen Update

#20

Jesper, Denmark

Re: Well, I must say

Jesper, Denmark

>Geees, no mica flakes?

Re: Kitchen Update

#22

The Mica Group

Jim Shaver - Oakville, Ont

>Hi Jesper,

Hmmmm well mica is a general name given to a mineral group for an assembledge of a variety of silcates with common symetry and crystal form, such as muscovite, biotite, and lepidolite and a few of the less common ones such as glauconite, paragonite, phlogopite and zinnwaldite. As I remember the mica group is actually a rather large group of minerals with over 30 members, sort of like an orchestra.

:-)

Know you Know,

Jim

Re: Kitchen Update

#23

Re: Maybe not...

Jim Shaver - Oakville, Ont

>Now that was funny!!

:-)

Re: Kitchen Update

#24

Re: The Floor Prep, > PIC

Fred Davis

>Jim,

it's good to see a mortar set tile, it saves a lot of grief down the line with large tile.

The slightest flexing under that size tile always results in a crack.

Looks great,

FredD

Re: Kitchen Update

#25

Re: The Floor Prep, > PIC

Jim Shaver - Oakville, Ont

>Thanks Fred,

I apreciate your thoughts, doing this right once...LOL

Take care,

Jim