Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Round table space consideration

Posts

Round table space consideration

#1

Round table space consideration

Craig Daymon

>I have a 4 foot diameter maple table top that has been asking to become a real table for years now. The table part I can handle, but what I'm wondering is when placing it in the room, how much extra space do I need to allow for chairs and movement around the room? This is going in the "breakfast" area of the kitchen.

If I knew what larger diameter would encompass the table and the additional seating/movement requirements, I could easily place it. The final location will have influence on how I make the table/any design considerations I need to make.

Thanks in advance,

Craig

Re: Round table space consideration

#2

Re: Round table space consideration

Ed Mulligan, Cape Cod

>Fine Woodworking had an article about this a while back, written by Chris Becksvort. He allows 36 to 44 inches from the table edge for a person to stand up and push his chair back. For your 4 foot table, this is a 10 to 11 foot+ diameter.

Re: Round table space consideration

#3

Re: Round table space consideration

Pat Evans

>Position the table top in the room on some temporary cribbing and use trial and error to see where it works best. By placing chairs toward the corners of the space, you can maximize its usefulness.

Re: Round table space consideration

#4

make a model

Bill Tindall, E.TN

>What makes an ansswer to this question imprecise is that space requirements may differ among table owners. Cut out the size from some cardboard and use this circle to help decide what is needed by placing the model and some chairs in the possible locations.

Re: Round table space consideration

#5

Re: make a model

Joseph Mulherin, Sr

>Bill is correct in suggesting making a model of the proposed table in the room. Also, try making some paper models of your furniture, roomsize, etc and place them in various positions to see how things will coordinate.

try this website for some wood modeling: www.ezwoodshop.com

Re: Round table space consideration

#6

A little more info

Craig Daymon

>I can't create a cardboard mock-up and try it because the house is just starting construction. I do have floorplans to work with. Part of what I'm also trying to accomplish here is to center the light fixture above the table in that area.

I think that 10-11 foot diameter circle might make it tough to place. Though I might have an idea. If I cut a 90 degree pie wedge out of it I might be able to fit it to the corner of the utility room adjacent to the breakfast and kitchen area. Of course this idea may make the light placement more difficult.

Thanks.

-Craig

Re: Round table space consideration

#7

Light solution.

Rod Peterson -- Ormond Beach

>This may not be so great if you're set on having a fixture hang directly from the box and surrounded by a medallion, but if you can plan in a swag lamp, you can just center the box in the ceiling during construction and then, ahem, "SWAG" the fixture in the center of the table after it's built.

Rod

Re: Round table space consideration

#8

Re: A little more info

Bill Howatt

>If you are going to have a hutch or other furniture items in the room be sure to allow for them in placing the light since they will influence where you can put the table.

A round/oval table in the center of a dining room isn't too much of a problem. I consider small round tables, about 2' dia, to be a real pain unless you have a corner for them. IMO, they just don't look right or fit efficiently anywhere else, at least in our house.

Bill

Re: Round table space consideration

#9

Re: Round table space consideration

mdclor

>We have a semi-circular breakfast nook that is about 10.5 feet across with a 4 foot round table and there is enough room for the chairs and some space behind them. There is 42 inches from the edge of the table to the walls. It is a little tight, but definitely do-able.

HTH,

Merle

Re: Round table space consideration

#10

Re: Round table space consideration

Greg Young

>A 4' dia. table will seat 5, 6 in a pinch with an 18" chair. Usual rising space is 32" ie. from a wall but if you want passage behind the seating allow an extra 18" GY