Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Jessem tools

Posts

Jessem tools

#1

Jessem tools

Patrick Ramsey

>does anyone have any informationabout Jessem Tools. Have been trying to reach them for awhile now, with no luck. They don't answer thier phones or emails. Neeed replacement parts on a brand new sliding table I bought. Any information would be helpfull.

Re: Jessem tools

#2

Re: Jessem tools

George@Colonel's Workshop-Havertown PA

>Good Afternoon Patrick,

I bought a Mast-R-Lift for my 7518 router about a year ago. Ity took me almost 6 months to get it because everybody was back ordered. Many excuses even when I called JessEm directly. After installation, I experienced a problem and their customer service was nil: nothing happened. No big deal as the table insert was stuck. It requires a clockwise twist to loosen: counter intuitive. I needed a light ball peen hammer and broke their wrench. I banged up the table and insert trying to loosen it and they said they'd replace the insert. Also told me it was the first report of that kind on problem they ever received. I've been waiting for the insert now for almost a year.

The lift works as advertised. But I have a very sauer opinion of JessEm, and would never ever buy anothger tool from them or indorse them in any way. Good luck.

George

Re: Jessem tools

#3

Re: Jessem tools

Jim Shaver - Oakville, Ont

>I have a Jessem router table and lift, works well. They were originally from Ontario but moved to the US some years ago, I have not seen them around here in awhile. I am sorry that you are having these problems, I used to know who to call there, but they seem to have gone in a new direction that is not about helping you I can see.

Keeping my fingers crossed for my table, hoping you get some help here,

Jim

Re: Jessem tools

#4

Re: Jessem tools

Brent Smith, Montreal

>I've had a Jessem table and lift for several years now. When they were in Canada CS was great. I dealt with them a few times and had all questions answered, or parts shipped, on the first phone call. Last year I tried getting some new inserts from the 'new' Jessem in the States. 5 or 6 phone calls later I was told they were on the way.....like George, I'm still waiting for them. I wish you luck with your problem.

Re: Jessem tools

#5

Re: Jessem tools *LINK*

Dave Anderson (PacNW)

>They take great pride in their customer support. Read it for your self.


Contact JessEm

Re: Jessem tools

#6

Re: Jessem tools

Dick Haley

>I have heard enough in these few posts not to deal with them, even though I was considering one of their products...Thank's all.

Re: Jessem tools

#7

Hey Dave!

George@Colonel's Workshop-Havertown PA

>Good Evening Dave,

Did you ever hear a vendor yell "ROTTEN FISH"? :<)

George

Re: Jessem tools

#8

Re: Jessem tools

Kirk (KC) Constable

>I've posted on a couple other sites that I've been trying to get someone there for a couple weeks now. No answers to multiple Email(s) or phone message(s). I found my drive belt somewhere else. I won't be buying anything that says Jessem again.

Re: Jessem tools

#9

Re: Jessem tools

Fred Davis

>I have heard this lament before and it sounds remarkably like the path Trendlines took before they went down for keeps.

FredD

Re: Jessem tools

#10

Re: Jessem tools

Patrick Ramsey

>Well, thanks all of you for your input. I suppose this morning was the death nell. I called both of thier numbers and they are disconnected. The good news is I bought the sliding table new, on ebay for $275 instead of the $600 Jessem was asking. So now I guess I'll have to jimmy rig my own parts. I suppose in this insane economy it should be no surprise that small firms are folding.

Re: Jessem tools

#11

Just Because I Posted It!

Dave Anderson (PacNW)

>Don't mean I believe it!!

Re: Jessem tools

#12

Foreign tools

GolfSteve in Calgary

>Things always go downhill when a company ships production to a foreign country.

:-)

BTW, I have a Canadian made Jessem router table bought several years ago. I recently bought a Jessem sliding table, USA made.

I thought the quality of the sliding table was lower than the quality of the router table. It is still pretty good, and I highly recommend the Jessem sliding table, but the anodizing was spotty in a few places, the machining on a few of the non-critical pieces was rough, etc., in comparison to the router table which was perfect in every way out of the box.

I had one problem with the router table which was rapidly addressed by Jessem. I did not have to contact Jessem in The States yet.

Re: Jessem tools

#13

Tongue in Cheek!

George@Colonel's Workshop-Havertown PA

>

Re: Jessem tools

#14

Re: Jessem lives?? *LINK*

Henry (Raleigh NC)

>All:

I just saw this posted a few minutes ago by Tom Hintz on the NCWoodworker.net site.

Tom has a website at http://www.newwoodworker.com/ and is considered quite a reliable source (he does a lot of tool testing).

JessEm seems to have moved (back to?) Ontario Canada it seems?!

Henry

hwynands@ieee.org

post from NCWoodworkers.net

________________________________

JessEm Lives

There has been a lot of rumor going around about the demise of JessEm recently. I spoke with my contact at JessEm yesterday and the contact information below is current as of today, 4-30-2009. They are having major issues in Canada getting the phone stuff done but hope to have all of it handled by this coming Monday.

JessEm Tool Company, LTD

56 Churchill Drive

Barrie, ON L4N 8Z5

705-726-8233 (office-currently active)

705-726-7519 (fax-currently active)

1-866-272-7492 (toll free will be active on Monday)

1-800-436-6799 (toll free will be active on Monday)

___________________________________________


Tom's site: Newwoodworker.com

Re: Jessem tools

#15

Re: Jessem lives??

Jim Shaver - Oakville, Ont

>Thanks Henry, appreciate the post

You think they would post a cell number, we have those and email in Canada, maybe even a web posting on their site to explain the current status of change. Barrie is about an hour north of Toronto, so it's not in the vast unknown.

To me this sounds a little like it was a poorly planned uncoordinated transition. Lets hope that given some time and better communication from Jessem that perhaps they can recover. The products are well thought out and great to work with, I can see the opportunity lies in their Customer Service and public response to this loss in confidence.

Take care,

Jim

Re: Jessem tools

#16

I Called JessEm, Spoke to Partrick Curry, VP Ops.

Jim Shaver - Oakville, Ont

>Hi,

I just called JessEm and spoke with the VP of Operations, Patrick Curry.

I asked him to come to WC and read this series of posts and to support you with your concerns.

They are moving operations home to Barrie Ont after having located in the US a few years ago. Issues with the phone numbers etc are real, the number belonged to a previous person who's VM was still active. I spoke itially with a person named Laura who was very helpful.

Patrick sounds like a sincere person and was happy to get my call, although he sounded stressed.

Let's all give him a chance to see if he can get some constructive feed back here on how to address your concerns, supprot the product and build up some credability.

Thanks,

Jim

Re: Jessem tools

#17

Re: Jessem tools

Patrick Curry - VP of Operations JessemTool Compan

>Hello,

This is Patrick Curry, VP of Opertions at JessEm Tool Company. Jim Shaver contacted me to let me know the concerns customers are having with contacting JessEm.

I wanted to contact everyone and let them know that we have closed our Tennessee facility and moved all operations including manufacturing back to Barrie, ON Canada. We are currently experiencing phone problems which is the reason it has been difficult to reach anyone at JessEm.

Over the last year we have experienced difficulty in servicing our customers to a respectable level. For this reason, we decided to move all operations back to Canada. I want to apologize for any issue or inconvenience that this has caused.

Now that we are back in Canada, you will see a much improved service level including quality issues.

Please see the new contact information below for JessEm Tool Company:

JessEm Tool Company, LTD

56 Churchill Drive

Barrie, ON L4N 8Z5

705-726-8233 (office - currently active)

705-726-7519 (fax - currently active)

1-866-272-7492 (toll free will be active on Monday)

1-800-436-6799 (toll free will be active on Monday)

Please feel free to contact me directly if you have any question or need any assistance.

Patrick Curry

JessEm Tool Company

847-917-3384 (mobile)

pcurry@jessem.com

Thanks for your suppport of JessEm Tool Company.

Sincerely,

Patrick Curry

Re: Jessem tools

#18

Re: Jessem tools

Howard Norman

>Thanks Patrick. I like to see a company acknowledge their problems and make efforts to correct them. I know that the economy has had its toll on a lot of companies.

Good luck.

Howard

Re: Jessem tools

#19

Re: Barrie Ont.

Henry (Raleigh NC)

>Hey Jim - of course you don't know this about me, but despite my current NC location, I am reasonably familiar with Barrie; I have driven through or past it many times. I grew up west of London Ont. and my parents had some property near Bracebridge in the Muskokas.

I've been to any number of the beautiful, spacious, and sometimes extravagant vacation homes at the NC beach or in the NC mountains; to me there is still nothing quite like the rugged beauty of the Muskokas cottage on the lake. And I have always considered Barrie the entry point to the Muskokas.

I'm glad JessEm appears alive and kicking in Barrie. I wish them well.

henry

Re: Jessem tools

#20

Re: Jessem tools

Tom Hintz

>I have known Patrick Curry for some time now and dealt with him for years while he was still at JET. He is a stand up guy and certainly not a lightweight in the woodworking industry. I think will do JessEm a lot of good in their effort to fix these problems. Just the fact that they moved the operation back to Canada rather than throwing in the towel says a lot.

Tom Hintz, Publisher

NewWoodworker.com LLC

Re: Jessem tools

#21

Jimmy Rig, is that Jerry's brother?

Dan Mitchell

>Or is the Jury still out on that one? ;-)

I was seriously considering one of their sliding tables for my PM2000, even if the company hasn't collapsed entirely, I'd pass on it after reading this thread. I agree about the economic times, though it sounds like Jessem's lousy service has been going on for awhile. I hope you're able to make yours work, Patrick.

Dan

Re: Jessem tools

#22

Thanks for posting Patrick

Jim Shaver - Oakville, Ont

>

Re: Jessem tools

#23

Actually, first cousin

Patrick Ramsey

>

Re: Jessem tools

#24

Re: Jessem tools

Patrick Ramsey

>Patrick-

Thanks for responding to the thread I started. Being the owner of a medium size business (a business directly connected to the finance industry) I can certainly understand difficult times. My question is very simple: How do I get the replacements parts I require to get my BRAND NEW sliding table up and running. I've been trying for four weeks now. I have been told on multiple occassion (when able to reach someone {Cindy Richards) that the parts were sent. clearly they have not been.

Re: Jessem tools

#25

Re: Jessem tools

Patrick Ramsey

>Patrick -

There are a lot of people over at Sawmillcreek that might want this ifo too.