Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Mission Side Table > PIC

Posts

Mission Side Table > PIC

#1

Mission Side Table > PIC

Jim Shaver - Oakville, Ont

>Hi,

This is my newest project, a Mission Side Table. This is a table that was featured on Woodwork Magazines cover a few years ago, made by Chris Schwarz.

Photobucket

I added my own twist with a G&G like stylized foot, a book matched top and an ebony plug for fun.

Photobucket

The finish is from Jeff jewitt's web site, it is bsed on his Mission finish, the wood is quarter sawn white oak.

Photobucket

Photobucket

The top is book matched, made from a single board.

Photobucket

Photobucket

Photobucket

The top was planed flat first then cut on a home made circle cutting jig on my band saw. The edges were then filed smooth.

Photobucket

Most of the table was made with hand tools, minimizing my power usage, sort of my Green effort perhaps..

Thanks for looking

Photobucket

Be Well,

Jim

Re: Mission Side Table > PIC

#2

Re: Mission Side Table > PIC

George@Colonel's Workshop-Havertown PA

>Hi Jim,

I always appreciate the lay out of tops, and, your's is tops for sure! My guess is that in spite of that magnificent plane, some of you went in to getting it flat. As to the accent piece--keep plugging. :<) Super job in every respect.

George

Re: Mission Side Table > PIC

#3

Classy

Clint Searl, at the base of Haycock Mtn

>

Re: Mission Side Table > PIC

#4

Such a Mission-ary Man!

Joanne in Pt. Pleasant, PA

>James, James, James! Are you not sleeping again?! A giant kitchen remodel, new Konrad planes to play with, a new table (hey, that project was on my to-do list, too, Twin!)--when do you have time to sleep?!

Fantastic work, as usual. The G&G leg detail and ebony plug make this simple table something special. Don't you love the smell of QSO? I'm making a little wine rack for a gift and using some of that wood also. With walnut. It sure smells good in my shop.

BTW, the kitchen is looking great. Are you guys eating out every night? I'll bet Eileen doesn't mind the break from cooking, but I'll be she's anxious to have her kitchen back.

Re: Mission Side Table > PIC

#5

Re: Mission Side Table > PIC

Bob Entwisle in NJ

>Hi Jim,

Beautiful work as usual!

I especially like the subtle foot detail!

Bob in NJ

Re: Mission Side Table > PIC

#6

Re: Such a Mission-ary Man!

Jim Shaver - Oakville, Ont

>Thanks Joanne,

I am pretty busy these days, the house is a major renovation zone... Lots of meals on the Bar- B-que.

I have a contractor working as well, so between he and I things are moving along well, kitchen cabinets are simple to make, can't understand why they are so expensive to buy?

More coming later.

Take care,

Jim

Re: Mission Side Table > PIC

#7

Re: Mission Side Table > PIC

Jim Shaver - Oakville, Ont

>Thanks Bob,

The foot detail is one I have used before, it works well for my eye too. It is a process detailed and explained in Darrel Peart's G&G book.

Take care,

Jim

Re: Mission Side Table > PIC

#8

Re: Mission Side Table > PIC

Mark Mandell - Gone Round In Jersey

>Nice piece, Jim. Jeff's finish worked well for you. Did you fill the pores in the top? Bottom champher lightens the top just enough.

Good job all around.

Re: Mission Side Table > PIC

#9

Re: Mission Side Table > PIC

Jim Shaver - Oakville, Ont

>George,

You are priceless my friend, I always know before I click on a post with your name I will leave with a smile, Thank You... your Return on Investment is to be Treasured!

Take care,

Jim

Re: Mission Side Table > PIC

#10

Re: Mission Side Table > PIC

Jim Shaver - Oakville, Ont

>Hi Mark,

Thank You! I left the top unfilled, I wanted the tactile feeling of the wood to be there so it is simply the glaze that filled the open pores to give it a highlight.

I actually used a spoke shave to create the lower chamfer on the table top, that was something I really spent a lot of time getting right, it was well worth the learning, thank you for noticing..

Take care,

Jim

Re: Mission Side Table > PIC

#11

Re: Mission Side Table > PIC

Fred Davis

>Thanks for showing , nicely done

FredD

Re: Mission Side Table > PIC

#12

I like your outstanding details

Bricofleur

>Hey Jim,

I'm not a big fan of Mission Style furniture but I must admit that your table caught my eye. I particularly like the carved detail on the legs and the dark square peg at the cross section of the stretchers.

I like the fact that the carved detail on the legs can be seen only from a closer look, which is like a... surprise!

Nice job and nice work. Congrats.

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: Mission Side Table > PIC

#13

Re: I like your outstanding details

Jim Shaver - Oakville, Ont

>Merci Serge!

Thanks for your kind words..

Take care,

Jim

Re: Mission Side Table > PIC

#14

I know you've been playing with this for awhile...

Hikmet C. Sakman -- Victoria, BC.,CDN

>....and all I say is:

-Nice wood

-Nice details

-Nice finish

-Very nice tool...!

Do I need to say more? ;-)

Take Care Jim.

Chico...

Re: Mission Side Table > PIC

#15

Re: I know you've been playing with this for awhil

Jim Shaver - Oakville, Ont

>Thanks Chico!

I have a better one coming later this summer, stand by for a few new ones..... the shop is humming!

So, how much cash do you have in the "Tool Chest" for Konrad's visit...??

Take care,

Jim

PS, I warned him to not let you drive by the way!! , LOL

Re: Mission Side Table > PIC

#16

Jim - Question on carving the legs

Bricofleur

>Hey Jim,

How did you carved the outside faces of the legs of your Mission table? I guess you used a router and a slanted pattern, but I might be out of the track. I like this detail very much. And since I'm building several demilune tables, that could be a nice touch to one of them. Thanks.

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: Mission Side Table > PIC

#17

Hope this Helps you Serge, Pics

Jim Shaver - Oakville, Ont

>Hi Serge,

I worked each side of each leg. The process is detailed in Darrell Peart's Book , Greene and Greene.

The process involves making a jig and slanting it with a fixed wedge, a 1" bush anda 1/2" straight cutter.

Photobucket

I then round off the end with a sander to get the shaped foot.

Photobucket

Photobucket

Hope that helps,

take care,

Jim

Re: Mission Side Table > PIC

#18

Yes. Thanks. A picture worths 1000 words.

Bricofleur

>Thanks Jim.

Great! This is exactly what I thought, using a slanted pattern. The idea of using a wedge is excellent. I thought you had a tapered pattern but the idea of the wedge is better and simplier. I saved your pictures for further uses. Thanks again for sharing.

Best,

Serge

www.atelierdubricoleur.spaces.live.com