Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

I am done for the month

Posts

I am done for the month

#1

I am done for the month

Dustmaker Mike

>The LOML and my truck are in MO at the kids house. I drove down for Easter and had to fly home because I broke a Spark plug off in the head. $400.00 later the sparkplugs are all changed. I went there to change a vanity and sink as well as some other little projects. So most of my portable tools are still there. Now on to this morning. I started to redo a vanity in the bathroom. I took the door off and removed the drawers. I went to pull off the drawer fronts but the screws where stripped, finally I get them out. Next trick is remove the cheap flat panel and replace it with a Bead Board panel. I grab my smallest router and guide to make sure I don't make a mess of it. While loosing a screw that holds the rods on the guide it brakes. I go to the basement shop to find an easy out and I hear water dripping.

The dishwasher was leaking onto my wood stash (no big deal mostly rough cut) but it was all over the floor and a few of my nailers I had stored near the wood stash. So I am finished for the month no more work until the gremlins go away.

Is it to early for a Frosted Malt Beverage?

Re: I am done for the month

#2

Re: I am done for the month

Mark Mandell - Gone Round In Jersey

>It's ALWAYS 5 o'clock somewhere!!!

|;-}}}

Re: I am done for the month

#3

Burp opps Excuse Me(-;

Dustmaker Mike

>

Re: I am done for the month

#4

Hey! This Ain't Twitter Ya Know!

Mark Mandell - Gone Round In Jersey

>

Re: I am done for the month

#6

Scotch!! easy on the water

Frank in Forest Hill

>

Re: I am done for the month

#7

The rule is: everything breaks simultaneously

Bill Houghton, Sebastopol, CA

>and your actions are correct. the only cure is to stop moving until the epidemic passes.

Re: I am done for the month

#8

Re: I am done for the month

Bill White

>I thought I was the ONLY guy with that kind of "luck".

Bill