Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Mostly OT for car buffs *LINK*

Posts

Mostly OT for car buffs *LINK*

#1

Mostly OT for car buffs *LINK*

Dan Donaldson

>Interesting information about Morgan cars. Seems that they have a significant wood component to them.


Morgan Cars

Re: Mostly OT for car buffs *LINK*

#2

I've seen the early ones

Tim Greif - West of Chicago

>Years ago during a ski trip to the Sierra Nevadas, I visited the Harrah's Auto Museum in Reno NV before the whole collection was sold off. They had a few Morgans in that collection. The early ones were almost all wood. What we see as stamped sheetmetal fenders were actually a parquet of small wood pieces all shaped to give the flowing lines. They were one of, if not the most expensive cars in the world back then. At least that's what they told us during the tour.

Re: Mostly OT for car buffs *LINK*

#3

Re: Mostly OT for car buffs

Ron Bauman

>An old boss of mine owned a Morgan. I believe he said it had a wooden frame. Friday nights he would take me home after cashing our pay checks at the bank and playing a bit of pool at a local oasis. It was a very nice car in the feeling of an MG-TD, complete with singer sewing machine engine. I always loved the leather belt over the bonnet.

Re: Mostly OT for car buffs *LINK*

#4

Re: Mostly OT for car buffs

Charlie Self

>I don't know about the newer Morgans, but one of the guys in my squadron at MCAS Kaneohe Bay had an older one (newer then) that I got a ride in a couple times. Quite neat, and he mentioned the wood components several times.

Go back far enough and many cars have wood components: if you can, check my article in the May "Cars & parts" on a 1924 Overland. That was rebuilt by a near neighbor (around here, near is under five miles: Todd is maybe two miles). He's a retired cabinetmaker, which made that part of the restoration less onerous, but he still farmed out the wood spoked wheels.

That brings us back on topic, right?

Re: Mostly OT for car buffs *LINK*

#5

Re: Mostly OT for car buffs

Bill Houghton, Sebastopol, CA

>Morgan uses, or at least used to use, ash - light for its strength and flexible, but not a durable wood in the weather, so high maintenance. It's been a conservative company, using for years a sliding pillar front suspension that required daily oiling (at some point, they adopted a hand pump on the driver's side that stole a little oil from the motor for this purpose).

I saw some of the motorcycle-engined trikes race at a vintage race once, and they are fast little critters in race trim. LOML and I spent two-three days playing leapfrog with one almost 40 years ago, when we were driving across country on state (two-lane) highways because our VW bus wasn't happy on interstates. Seems three-wheeled Morgans aren't either, so we'd see this gentleman in front of or behind us, depending on who'd stopped most recently and for how long.

Wood in cars continued longer than people realize, though not necessarily to this degree. The Triumph Spitfire - 1970's - used a plywood "firewall" between the passenger compartment and trunk, back seat bases on many European cars used plywood up into the late 1970's (maybe later), etc. American cars used plywood in various ways into the 1960's, and, of course, the lovely Ford and Chrysler woodie wagons used real wood trim in the 1950s, until they replaced it with ugly fake wood of one sort or another. Then there are the wood dashboards on Jaguars, Rolls-Royces, etc.

My favorite: my 1949 Studebaker truck uses two tiny pieces of maple to fill gaps left by the milling process between the engine block and the rear main bearing cap, where the pan seal won't fit. Maple is a perfect engineering material for this purpose, because it swells when the oil hits it, making a complete oil seal.

This isn't the right forum to get into engineered uses of leather, felt, etc., in autos...

Re: Mostly OT for car buffs *LINK*

#6

Wood in a Vette

Tony - Memphis

>Seems like I read recently that Corvettes have wood in their frames. Can't recall where I saw that.

Tony

Re: Mostly OT for car buffs *LINK*

#7

Re: Wood in a Vette

Brian in Brighton

>I thnk the floor panels are made from birch plywood. Probably a baltic type birch ply. It's light and stiff.

I don't think any other cars have it. Not even sure the C6 has it, the C5 did.

Brian in Brighton