Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Multi-Purpose Jig *LINK*

Posts

Multi-Purpose Jig *LINK*

#1

Multi-Purpose Jig *LINK*

Bricofleur

>I designed and built this jig because I felt it was awkward and hazardous to rout through a workpiece overhanged over the edge of a workbench. I wanted a safe way to rout slots, large holes or patterns on a solid and secure base.

I soon found out that this jig is also perfect to raise a blank to be cut with a circular saw, a jigsaw or a rotary tool, and also great as assembly or glue-up table since I can clamp a project from underneath.

In fact, this jig is a perfect small shop solution since it is a multi-purpose jig in one.

Click to see all the details on my website.

Best,

Serge

www.atelierdubricoleur.spaces.live.com


img

Multi-Purpose Jig

Re: Multi-Purpose Jig *LINK*

#2

Great idea!

doug f, san clemente, ca

>Serge - that is one of the cleverest ideas I've seen in a long time. Would you care to share dimensions, construction procedure, etc.?

A great idea and, from the pictures, it looks to be extremely well constructed. Quite a piece of craftsmanship.

Thanks for sharing.

Doug

Re: Multi-Purpose Jig *LINK*

#3

A challenge

Ellis Walentine, Host

>That jig looks like a winner, Serge. I would like to see a dedicated attachment for routing French dovetails. I used a roughshod version of this type of template routing jig to do French sliding dovetails in the backs of drawer fronts. I think it would be a good extension of your excellent idea.

Thanks for posting. How do you keep the shop so clean?

Ellis

Re: Multi-Purpose Jig *LINK*

#4

Re: Great idea!

Bricofleur

>Thanks Doug,

My pleasure to share the idea.

Follow the link I posted to the appropriate page of my website to see all details, dimensions and pictures.

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: Multi-Purpose Jig *LINK*

#5

Re: A challenge *LINK*

Bricofleur

>Sorry Ellis, that jig "IS" a winner. LOL. I use it at almost every session in my shop.

How do I keep my shop so clean? I sweat keeping it that clean, I sweat!!! After each session I clean the shop thoroughly. After a dust storm made by routers or sanders I stop and I clean up any mess. With years I realized that I work better in a clean environment. I would also say that my brain works "cleaner", or is "sharper". It may looks funny, but this is my truth.

There is no need for me to add another attachment to this jig for French sliding dovetails since I already have another jig to accomplish this particular task (and others, of course). Follow the link to the appropriate page of my website and see what this jig (second on the list) can also do. You will understand that this jig will groove the front drawer back while my horizontal router table will be ideal for the tail part. Another jig Ellis, another WINNER. LOL

Best

Serge

www.atelierdubricoleur.spaces.live.com


img

Router Table Angled Dado Sliding Jig

Re: Multi-Purpose Jig *LINK*

#6

Re: Multi-Purpose Jig

Mike Caldwell

>Thank you for showing us how you did it. I've run into the same concerns about routing on the table edge, etc. You have inspired me.

Thank you,

Mike Caldwell

Re: Multi-Purpose Jig *LINK*

#7

You're right *LINK*

Bricofleur

>You're right Mike. On my last project, a storage chest, this jig was handy to mill the edges of the lid.

Good luck building one.

Best,

Serge

www.atelierdubricoleur.spaces.live.com


img

Storage Chest

Re: Multi-Purpose Jig *LINK*

#8

Re: Cool, nice attn to details

Brian in Brighton

>You know, if you put a couple of those vacuum plates on their you can rout 100% of the edge without moving the clamps.

I like your attention to details, rounding the corners and routing a chamfer on the edges.

Brian in Brighton

Re: Multi-Purpose Jig *LINK*

#9

Re: Cool, nice attn to details

Bricofleur

>Hey Brian,

If it worths building it, it worths building it right and well! I do'nt regret since I use it at almost each session in the shop.

I recently found out that there's no need for vacuum plates. Since the top of each upright is a flat 4" wide, I drop a stretch of non skid router pad on each of them and workpieces don't move.

I must admit though that if I had such vacuum plates, I would give it a try for sure.

Thanks for your compliments. The best compliment would be seing the one you will build!

Best,

Serge

www.atelierdubricoleur.spaces.live.com