Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Close call with a bandsaw last night

Posts

Close call with a bandsaw last night

#1

Close call with a bandsaw last night

wilbur

>I had a somewhat scary issue with my bandsaw last night that I wanted to share. I have an old 1940's Walker-Turner 16" bandsaw, with urethane tires that I installed about 2 1/2 years ago. I was making a resaw-type cut in a board 5 1/4" thick, when there started to be a lot of vibration. I hit the off switch and backed up. Then there was a loud bang and the urethane tire from the top wheel came off, coming out the area where the blade exits from the top wheel cover, jamming itself between the blade.

Although urethane bandsaw tires have many advantages, I've always been a little worried about the fact that they go on the wheel without any adhesive, and before this happened I've noticed that the tires could be pushed around a little on my bandsaw wheels.

Has anyone else noticed anything like this?

I ordered some rubber bandsaw wheels today, and will give that a try.

Re: Close call with a bandsaw last night

#2

Re: Close call with a bandsaw last night

Alex Grigoriev

>Does the wheel have a groove for the tire?

Re: Close call with a bandsaw last night

#3

Re: Close call with a bandsaw last night

Pete in Holland, MI

>I haven't had that issue on my saw (still running with the OEM tires), but what you described, with the blade pushing the tire around the wheel, does sound feesible. Curious to see if others are having that issue. Wonder if it is a tension thing ?

Pete

Re: Close call with a bandsaw last night

#4

Wheel/tire groove

wilbur

>No -- this particular bandsaw does not have a groove for the tire. It has a flat profile.

Re: Close call with a bandsaw last night

#5

Adhesives for tires

Ellis Walentine, Host

>Wilbur, I once had that same saw and I replaced my tires with crowned rubber ones using adhesive. No problems there. I never tried urethane tires, but I'm wondering why they don't recommend using adhesive.

Ellis

Re: Close call with a bandsaw last night

#6

Re: Adhesives for tires

Alex Grigoriev

>I'm not sure any adhesive will hold to the slick urethane. Urethane glue maybe, but then you won't be able unglue it when necessary.

Re: Close call with a bandsaw last night

#7

Re: Close call with a bandsaw last night

Marv....... Northern California Lake Co.

>Wilbur,

Perhaps the old bandsaw isn't entended to use tires. Some of the old bandsaws had the blade run directly on the metal surface.

When a tire is used, it must be very tight, stretched to fit like a rubber band.

Marv