Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Stirring the receptacle-orientation pot again *LINK*

Posts

Stirring the receptacle-orientation pot again *LINK*

#1

Stirring the receptacle-orientation pot again *LINK*

Henry Higginbotham

>If THIS doesn't make everyone happy, nothing will. ;-)


Rotating Receptacles

Re: Stirring the receptacle-orientation pot again *LINK*

#2

Re: Not making me happy

Brian in Brighton

>I would not buy these on one opinion. I have been working with machinery with rotating electrical and pneumatics for almost 20 years. The contacts wear out, the seals leak.

This is a really cool idea....for industrial machines where the receptacle is encased in steel. I would be very leary of a fire as the contacts wear out. They can't use the best rotating contacts due to the price. Moving contacts stick too. You just know some idiot is going to consider that since it rotates he can hook it up to something that needs to spin constantly.

Just my 2cents.

Brian in Brighton

Re: Stirring the receptacle-orientation pot again *LINK*

#3

What the heck, I'll take a shot…

Rod Peterson -- Ormond Beach

>I've heard it doesn't meet code in some places.

I'll stop now.

Rod

Re: Stirring the receptacle-orientation pot again *LINK*

#4

But

Mark Mandell - Gone Round In Jersey

>Only in "advanced" places employing code officials whose knuckles are more than 12" off the ground when they walk.

Re: Stirring the receptacle-orientation pot again *LINK*

#5

Re: What the heck, I'll take a shot�

Kirk (KC) Constable

>Does 'code' really apply to something like this that plugs in to an exisitng outlet?

Re: Stirring the receptacle-orientation pot again *LINK*

#6

Re: What the heck, I'll take a shot�

Rob Lee

>Rod -

I don't understand your comment. The device has UL/cUL approval for sale and use in all of North America.

There are, however, a number of designs of rotating/changeable orientation plug devices that are awaiting approval, or are completing the approval process - but this unit is not one of those.

I saw the first of these products 3 or more years ago at the National Hardware show... it's taken this long to complete the testing and approval process - primarily as a result of the requirement to develop standards on the part of the testing agencies.

Cheers -

Rob Lee

Re: Stirring the receptacle-orientation pot again *LINK*

#7

Re: What the heck, I'll take a shot�

Howard Norman

>Rob, I think Rod was being somewhat tongue in cheek with his comment. There was quite a discussion here recently about some alleged local code questions in a part of California.

BTW, I consider your web site to be one of the best places to purchase things on the web.

Re: Stirring the receptacle-orientation pot again *LINK*

#8

Re: What the heck, I'll take a shot�

Rob Lee

>Ahh - that explains it... my contextual error....

We really go over that sort of stuff VERY carefully - and would be surprised if that was the case!

Cheers -

Rob

Re: Stirring the receptacle-orientation pot again *LINK*

#9

Re: They may be UL approved, but . . .

Pete in Holland, MI

>. . . I've had several outlets with the push-in wire connections fail, and they are UL approved too. Depends on how the swivel outlet was tested, regarding current and frequency of twisting, and a lot of other factors.

Nothing like good ole mechanical fasteners.

Re: Stirring the receptacle-orientation pot again *LINK*

#10

Re: Stirring the receptacle-orientation pot again

Victor P

>For the application illistrated should be just the ticket. How often do you unplug and move your step down transformers for small electronic divices? If you are like me, the answer is almost never.

In my kithen we have two outlets dedicated to those little transformers for mine and my wife's cell phone chargers, one has the kitchen clock/time/radio/cd player pluged into the upper outlet and the other has the home phone/answering machine plugged into the upper outlet. We have to walk across the room to plug anything else in.

Victor

Re: Stirring the receptacle-orientation pot again *LINK*

#11

Not-Fer-Nothing

Mark Mandell - Gone Round In Jersey

>Victor,

Have heard of several (too many) home fires in my area being caused by chargers left connected even when not being used. I make it a practice to unplug those things when charging's done.

mm