Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Elm for Kitchen Raised Panel Doors?

Posts

Elm for Kitchen Raised Panel Doors?

#1

Elm for Kitchen Raised Panel Doors?

JW Appletree

>We're remodeling our kitchen. Currently we have African Mahogany (plywood veneered) cabinet doors, that need to be replaced. (The Mahogany is badly dinged/scraped/gouged.) The cabinets themselves are in good condition.

Our problem is the kitchen cabinets use solid mahogany is a fairly subdued grain. So we're looking for a fairly common wood (not expensive/exotic) that is strong and a mild grain and preferable a medium color (walnut and cherry are out).

We've ruled out hickory (too wild color), alder (too soft) and oak (high contrast grain). We're leaning toward quarter or rift sawn elm or possibly common sawn ash.

I have not worked with elm before, but heard that it's has the tendency to split.

Does any one have any experience with elm? Or any other recommendations in this situation?

Re: Elm for Kitchen Raised Panel Doors?

#2

Re: Elm for Kitchen Raised Panel Doors?

Mark Mandell - Gone Round In Jersey

>Kind of a "fussy" wood because of it interlocked grain; tends to feather and fuzz. Keep your sand paper fresh. Nails and screws ok. Not a great finisher. Can't say about splitting except that busting the stuff up for firewood was an adventure, even with a 20 ton splitter. That's why they used to use it for ship keels and pier facings.

Looking for a plain grain wood? I'd suggest Silver Maple which you can dye stain to most anything you want.

Re: Elm for Kitchen Raised Panel Doors?

#3

Lee Grindinger

Elm is one of the most underated American hardwood

Lee Grindinger

>Don't hesitate to use it. Once dry it's a terrific wood. Properties are similar to oak as far as workability.

Lee

Re: Elm for Kitchen Raised Panel Doors?

#4

Re: Elm is one of the most underated American hard

Larry Clinton At Frankfort (Central)., Indiana

>My son & I are in the process of building all his kitchen cabinets. We got a great buy on a few hundred bf of air dried cherry a few years ago so using it. However we are making the interior shelves and all drawers from Red Elm. We have finished and partially installed about 14 running feet of base cabinets. These included 5 red Elm drawers we dovetailed on my Leigh jig. There were several shelves, one glue up in a L shape (corner cabinet) about 45" X 40". We had no problem working with the kiln dried elm - it does have a tendency to "feather" even with a new Forest WW2 blade and new Whiteside router bits, but the wood sanded out beautifully. The red Elm we used did have very high contrast grain - in my opinion more than White Oak or Ash. If I wanted a plainer wood as you stated, I think I would look at soft or hard maple. Other reasonable priced wood (in Central Indiana) you may want to look at are Sassafras or Hackberry. I assume you are purchasing rough sawn wood so you may want to do some shopping at your local sawmill - they may have some lesser known/used woods at a reasonable price that will be exactly what you want.