Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Another finishing question

Posts

Another finishing question

#1

Another finishing question

Dan Donaldson

>I have a piece of baltic birch plywood about 13 X 20 inches. I would like to put a sunburst on it (lighter in the center, going to dark on the outside edges.) The basic color would be green. How do you go about doing this so it looks decent? I don't have any spray equipment and would like to find some way to do it without. Any ideas?

Re: Another finishing question

#2

Re: Another finishing question

John Pappas

>Dan, I might be inclined to try a glaze, applying many thin coats and building up the color slowly. You can make a glaze with artist colors, linseed oil, varnish and mineral spirits. With a bit of patience I think this might work.

Re: Another finishing question

#3

Re: Another finishing question

Fred Davis

>Well Dan,

if you were closer , I would lend you my air brush, it is ideal for that type of work.

FredD

Re: Another finishing question

#4

Find a luthier

Ed Mulligan, Cape Cod

>Look for a luthier in your area and ask him to do it for you. An autobody repair shop might be another possibility.

Re: Another finishing question

#5

find an air brush "artist"

Bill Tindall, E.TN

>You can mail it to my neighbor and he will do it......or anyone that decorates bikes or vans or tee shirts.

Re: Another finishing question

#6

Re: Airbrushes are inexpensive

Glenn Madsen near San Francisco

>The equipment is modestly priced, assuming you have a suitable compressor already. An art supply house on the web will show you the possible options.

The time to get this right might indicate that you'll go through a lot of plywood in the training phase. Not unlike a lot of other wood working projects, though. ;-)