Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

I have completed a marathon......

Posts

I have completed a marathon......

#1

Alan Young

I have completed a marathon......

Alan Young

>Here are pictures of a Media Wall I have finally completed.This project began with design meetings with the client more than a year ago. After settling on a design the clients had to postpone the project to focus on other matters. We resumed discussions last July or so and came to agree on this basic design:


The project is made from Sapele veneers and hardwood. The Project features a lower bank of cabinets each with a center shelf. These store games and toys. The slim "component cabinet" holds the various media electronics and DVD's and CD'. A High Definition TV is mounted above the component cabinet and is covered by sliding doors in a custom track. Flanking the TV are shelves for books and pictures that run to the cathedral ceiling.


The cathedral ceiling is nearly twenty feet on the left or high side and just under 9 feet on the right or low side.


The stray speaker chord will soon be spliced and routed through holes that are already drilled.


I started the finish process with just polyurethane but a project this big is destined to show off the variations in the woods response to the finish. and the clients wanted a more uniform color across the piece so I used Bartley's English Chestnut Gel stain and Poly. If my space would have allowed it would have been better to spray a toned lacquer. Some of the finishing was done on site and that just added to the inefficiencies of the process.




Actual construction of this project spanned approx nine months. I worked on various sections at a time and had multiple installation sessions. I worked on other pieces in between work on this project. While the clients are pleased, I am mostly pleased to be finished. My shop is just not logistically correct for a project of this type. The weather was pushing me last autumn to get lower sections done and finished before it was too cold to apply the finish in my unheated barn. Over the winter I built and finished the various shelving sections in my basement but I couldn't push spring to get here fast enough to get the final sections completed.


This is a difficult project to photograph as I was shooting from the dining area trying to avoid other furniture that was in front of me and had been moved for installation. I will shoot a few more pics in a week or so when the shelves have been filled. I am tired!

Alan

Re: I have completed a marathon......

#2

Re: I have completed a marathon......

George@Colonel's Workshop-Havertown PA

>Hello Allan,

You should be tired! That is truely top shelf work, nicely integrated with the formation of the room's space. It must be a pleasure to be there and enjoy it.

George

Re: I have completed a marathon......

#3

Bravo, Alan!

David Yoho

>That's a very nice job from initial design to finished project, Alan. Your skills are showcased nicely here. Great job!!

Could you show us any better shots of the veneer on the doors? I think some folks won't be able to see them in the detail they deserve. You're becoming quite comfortable with veneering and it shows!

David

Re: I have completed a marathon......

#4

Thanks a lot!

Joanne in Pt. Pleasant, PA

>I'm getting ready to do some built-ins in a closet in my office. It will never look this nice, is nowhere near as big a project, and will probably take pokey moi just as long to complete!

This is a wonderful use of that huge wall. Usually I think cathedral ceilings are dramatic and impressive, but a waste of space and energy. And most people don't bother to use them to their full dramatic effect. This certainly catches the eye! I'm with David, can we get closeups of the veneer? The lower doors are interesting, but the sliding doors for the tv are fabulous. Was that one piece, quartered and rearranged?

Thanks for posting. I KNOW you are happy to move on from this project.

Re: I have completed a marathon......

#5

Re: I have completed a marathon......

Jim Shaver - Oakville, Ont

>That is mind boggling Alan...... incredible detail in the over all design, amazing wood too...can't imagine how you kept track of every thing and the fact that walls are never flat or square...That is incredible!!

Be Well,

JIm

Re: I have completed a marathon......

#6

Alan Young

The doors, veneer and finishing

Alan Young

>I don't have any good close ups of the finished doors at this point. But I will be going back in a couple of weeks to take more pictures with the cases full of the books and family pictures that will be replaced in the shelves.

Getting an overall even finish on this project was a bear. The low bank of full cabinets, the component cabinets, and the first section of shelving on the left, took the polyurethane finish in a fairly even tone. There were variations for sure, but they were pleasing and what one would expect from a natural wood finish without stain. As I started installing the upper sections of shelving and the TV doors, I found these pieces were much lighter after the finish-I did not change anything in the protocol that I can determine-although the time frame between the different sections was spaced out as much as 6-8 weeks.

I know there is a valid argument to letting the wood speak for itself and I was hoping that this project would lend itself to that very concept. However as the structure was growing and being installed over the months the clients were wanting the structure to have a more unified tone.

This isn't a very good picture but I think you can see how much lighter some of the face frame pieces (Sapele) were in the upper unit.


The TV doors were also much lighter but you could see the pattern better.


It became apparent that a glaze coat was my best available overall answer. The final color is now pretty even. A casualty of the glazing is the TV doors. I may remove them and give them another rework as the grain and pattern are now somewhat obscured by the applied glazing. I have some pictures of the TV doors under construction. The Sapele came from a quartersawn flitch about 11.5 inches wide. In these photos the veneer is glued to a plywood base and has a just applied coat of poly. The rails and styles are just placed next to the frame for an idea of the finished look.



As I mentioned earlier, this project would probably have been better served by a sprayed toned lacquer. My shop space simply doesn't have the logistics to accommodate that.

Alan

Re: I have completed a marathon......

#7

Outstanding !

Don Orr

>Very nice work, congratulations on its completion.

Re: I have completed a marathon......

#8

Is this what they taught you at SU? If so,

Bruce, a MN Galoot

>dang, they did a great job! So did you. This is a wonderful use of that space and execution of the idea.

Bruce

Re: I have completed a marathon......

#9

Alan Young

Re: I have completed a marathon......

Alan Young

>

"can't imagine how you kept track of every thing and the fact that walls are never flat or square..."

Hi Jim,

Yes there were several level/gaposis issues that were thrust into this build. Actually there was one major area of unevenness in the wall-It was right at the height of the component cabinet and Murphy must have been on vacation because even though you can spot the gap-about 1/2 to 3/4 inches if I recall, it really gave no structural implications. I should have taken more progress shots. The biggest "scare" was putting in the last shelving component-the left side shelving from the plant ledge upward.


It is constructed in two vertical halves. I used a Teletower(designed and made by my Dad! :^) to get the upper pieces in position.


I made the units to have a .5 inch gap between the ceiling. Installation of these went as smooth as could be imagined. I measured many times, wrote numbers down even more and called over to the clients house just to make sure what I had written was accurate. The when they'd confirm the number I'd get too nervous wondering if their tape was off from mine at all. So more than once I made a trip (12 miles round trip) back just to make sure. Late in the game I finally got smart and made some story sticks. But even these were so long they tended to bend as I was laying out cuts back in the shop and my "what if" nerves would re-ignite. But It's done! :^)

Alan

Re: I have completed a marathon......

#10

Alan Young

Sort of- I think I'm bi polar

Alan Young

>


Re: I have completed a marathon......

#11

You're a good man, Alan!

Bruce, a MN Galoot

>