Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

How to build an Exterior door Questions

Posts

How to build an Exterior door Questions

#1

How to build an Exterior door Questions

Barry Irby

>Have client that wants an odd sized (2' 10" X 5' 10")exterior door. Would like to have it vertical boards with Vee Grooves. How would you build it. What wood would you use?

Would you build it or would you buy a Vee Grooved exterior door and cut it down? Can you cut one down that far without ruining it?

Re: How to build an Exterior door Questions

#2

JL

Re: How to build an Exterior door Questions

JL

>Painted or stained? I've seen them out of pine, white oak and poplar. Very popular door for cabins around here. They usually do the "Z" on the inside with two horizontals and one diagonal.

Re: How to build an Exterior door Questions

#3

Re: How to build an Exterior door Questions

Fred Davis

>Exacty the door I put on the Chicken house , with a top and bottom half ,Z braced on the inside , material is what is called car siding around here , V-rustic on the west coast, generally Knotty Pine .

Used the same stuff for the beamed ceiling in the Sun room and also the Wainscot, same room. Finished with Amber and Clear Shellac , mixed half and half in the Sun room , painted on the Chicken House.

FredD

Re: How to build an Exterior door Questions

#4

Re: How to build an Exterior door Questions *LINK*

Bill Sams

>Here's a link to interior doors I made a while back. Just as an option for you. Just thicken the materials for exterior application. The doors are fir in this example


http://jwsjoinery.com/jws/firdoors.html

Re: How to build an Exterior door Questions

#5

Build it rather than cut one down...

John in NM

>Most commercial exterior slab doors have a particle board core with wood edging to hold hinge screws and locksets. So cutting one down to the dimensions you mention will definitely not work. Given the small size, I don't think you'd be able to find a frame and panel door to cut down either.

I'd build it by making tongue and groove boards of the desired wood (deep tongue and groove, maybe 1/2" rather than 1/4", but then I live where wood tends to shrink more than swell). I'd either screw the battens on or clench nail them with old fashioned cut nails.

Depending on the time of year and whether you expect the door to shrink or swell, you might need to fit it tight in the jamb or leave it a little loose. You can probably guess better than I based on your local yearly climate (I've almost sworn off doing some kinds of joints in the summer - there's no way to avoid gaps in the winter. Do them in the winter here, and they look fine all year).

Re: How to build an Exterior door Questions

#6

Re: How to build an Exterior door Questions

Hamish

>Hi Bill,

I really like your doors, especially the bow toped one. Do you think you could give me an idea of what sizes I should be aiming at if I were to make, say an exterior door? How thick should the tenons be and would you use laminated glass for strength?

Many thanks, Hamish.

Re: How to build an Exterior door Questions

#7

Re: How to build an Exterior door Questions

Bill Sams

>Hamish,

The bow top exterior door you speak of is 1-3/4" in thickness. The glass is double insulated 1/2" tempered glass. Tempering makes the glass more difficult to break and will shatter into small pcs versus large shards.

The tenons were either 1/2 or 5/8" thick. To make it easier, make them the same as your dado for the bottom panels.

I read your profile, hope you are done soon with your cement work and in your shop as you would like to be.

Take care

Re: How to build an Exterior door Questions

#8

Re: How to build an Exterior door Questions

Hamish

>Hi Bill,

Thanks for your feed back. I would like to replace our front door and at the same time do something to let more light shine in to lighten up the hall space. I had originally thought about extending the door frame out to the right side and add a vertical strip of windows but having seen your bow top door with it's window, that might be just the thing we are needing.

As regards my forthcoming workshop, I have still not actually begun fitting out the space where I would like to have it but I have been thinking about it a lot. It will be situated above a big water tank joined onto the side of our house, so I intend damp proofing the floor and mounting a plywood floor over extruded polystyrene to keep the cold out. I am also pondering over what type of sound insulation I should use. We have neighbours close by so would like to be able to work comfortably without feeling I'm annoying them every time I start up my TS. I had thought I could put up some dry lining walls with fiber-glass insulation behind or perhaps better still, create a room within a room, without actually having any mechanical connections between it and the outside shell. It sounds a bit costly and I don't know if it would be the best solution. What I do know is that I only want to do it once well and get on and enjoy my hobby.

Thanks for your interest,

Regards Hamish.