Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

No PM1800 but Minimax Bandsaw with Driftmaster *LINK*

Posts

No PM1800 but Minimax Bandsaw with Driftmaster *LINK*

#1

No PM1800 but Minimax Bandsaw with Driftmaster *LINK*

Mike Heidrick

>PM1800 - Timely post! - Guess it is time to post myself!

First off Hello to everyone. Looks like this site is full of folks with awesome tastes in tools just like me. Thanks for a great site!

I just read the PM1800 messages. Wow. I saw that bandsaw at IWF in Atlanta last year - surprised it did not have rust spots from drool. It shined like a chromed out Harley. I fell in love with a nice fence right then and there. It was amazing.

I already had a MM20 Minimax bandsaw so a new PM1800 $4K saw was seriously never going to happen. I had bought my saw used (guy unloaded it for super cheap to me) and it will be my last big bandsaw. note: It may not be my only bandsaw if I ever get another smaller one - should have kept my old 14" Jet as well but that is another story.

I never did like the MM fence though. I could not get it to stay at the drift angle - it always came loose.

Anyway - I went on the quest for a new resaw fence. I looked at a couple others and considered the Kreg and Carters new one. Even looked at the new mag swtch setup for resaw.

I found the solution for me - Laguna Driftmaster.

It has the same Hi low design like the PM1800 and Unifence designs which I love. It also has that indexing lead screw motion (selectable) that I think goes beyond the PM1800's fence. Problem was justifying the $$!

Well, in March and April Laguna knocked off 20% (guess it is now $95 off) and it pushed me over the edge two weeks ago. I am a sucker for "sales". I called Tim at Laguna and he had one on the way THAT DAY! I was excited. Four days later a box was left at the shop door!

I got it installed and no kidding - I took a piece of 3/4' red oak (I know - who cuts veneer in RO but it was the first wood I grabbed)and I had 1/16" perfect veneers the first time. No I have a 1 1/4" Resaw king and also a trimaster due to awesome deals found on woodnet but MAN, I am really thinking with some patience ANY blade can turn out veneers quickly.

So I love pictures of tools and installs. I took the time while installing mine to document the process. Link is below. Hope you guys like it. I also added guides at the time and have a write up on that if folks want to see it.

It is no PM1800 but I am VERY happy with the function of this setup.


img

Driftmaster install on MM20

Re: No PM1800 but Minimax Bandsaw with Driftmaster *LINK*

#2

Re: No PM1800 but Minimax Bandsaw with Driftmaster

paul waddle

>Nice bandsaw and laguna fence. Could this be installed on a 14" delta or should I just make do until I can rally afford a better and larger band saw? Thks,pw.

Re: No PM1800 but Minimax Bandsaw with Driftmaster *LINK*

#3

Re: No PM1800 but Minimax Bandsaw with Driftmaster

Mike Heidrick

>This fence can be mounted to any bandsaw pretty much. Check out my install above and you will see that if you can mount two bolts (1/2" holes), you can mount this fence. It is a great upgrade for any bandsaw!