Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Sealing a gel stain????

Posts

Sealing a gel stain????

#1

Sealing a gel stain????

Frank in Forest Hill

>Gentlemen,

I am finishing to top of a Stickley Mission oak table (original finish was removed yrs ago). The Rockler mission oak gel stain is right on the color of the legs of my piece.

I have not had good experience with sealing gel stains.... actualy was able to peel off a coat of sprayed on finish on an item yrs ago. Rockler recommends using their wipe on gel poly. I am concerned that it will have too much gloss for this application. Anyone have better experience with sealing over gel stains?

Thank You,

Frank on Chestnut Hill

Re: Sealing a gel stain????

#2

Re: Sealing a gel stain????

George@Colonel's Workshop-Havertown PA

>Good Afternoon Frank,

I used Seal Coat shellac over the last gel staining I did. I scuffed lightly w/320 grit and applied a wiping poly: 50/50 poly/naptha. Worked fine.

George

Re: Sealing a gel stain????

#3

Re: Sealing a gel stain????

A Wright

>I have never encountered a problem using oil based finish over gel stains. I have used gel stains on a handful of projects, and have never needed to treat the topcoat differently than with any other type of stain.

Re: Sealing a gel stain????

#4

Re: Sealing a gel stain????

Glenn Madsen near San Francisco

>My experience is that the Rockler Semigloss Wiping poly is actually a little dull for my tastes.

About the chemistry, you'd have to ask them that knows it.

Re: Sealing a gel stain????

#5

Fine as is

Michael Dresdner

>The gel polyurethane is not particularly glossy, but if you want it duller, simply wait until it is dry and rub it to satin with 0000 steel wool lubricated with a bit of paste wax.

As for compatibility, the gel polyurethane and the gel stain are the same basic material, but with color in the stain. They are fully compatible in both directions. Incidentally, the Rockler Mission Oak gel stain and Rockler Gel Polyurethane are made by the same company.

Re: Sealing a gel stain????

#6

Re: Sealing a gel stain????

Frank in Forest Hill

>George,

What are the benefits of thinning the wipe on gel? Are you still wiping it on or brushing it? Are you doubling the number of coats?

Thanks for Your Time,

Frank G

Re: Sealing a gel stain????

#7

Re: Sealing a gel stain????

George@Colonel's Workshop-Havertown PA

>Good Afternoon Frank,

I didn't thin the gel stain at all. It goes first on the raw wood and colors it. I applied Seal Coat shellac over the gel stain to seal it. My top coats were poly/naptha, about 50/50, and then rubbed out with 4/0 steel wool.

George