Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Grinders Like Tormek, Jet, Grizz, Etc

Posts

Grinders Like Tormek, Jet, Grizz, Etc

#1

Grinders Like Tormek, Jet, Grizz, Etc

howard

>How can one wheel provide the progression that I thought was needed for good sharpening? All the methods that use stones or sandpaper follow a steady increase to finer grits. What are your thoughts, is thee a trade-off with units of this type??Thanks

Re: Grinders Like Tormek, Jet, Grizz, Etc

#2

Re: Grinders Like Tormek, Jet, Grizz, Etc

Tony - Memphis

>I have a Tormek. They supply a grading stone that you use to make the surface coarse or fine. I think the grit is 1000 (by which standard?) when graded with the fine side of the stone. I really use the machine as a grinder. For most tools, I go to water stones after the Tormek (1000, 4000, 8000 - Norton set). For turning tools, I use them straight off the Tormek (except for the skews). For knives and shearing tools, I use them right off the Tormek. I shape my carving tools on the Tormek and finsh them up on oil stones.

Tony

Re: Grinders Like Tormek, Jet, Grizz, Etc

#3

How fast is the grinding?

Bill Houghton, Sebastopol, CA

>I have Delta's wet wheel grinder (no longer in production), which is great except that it's slower than a tired five-year-old in the parking lot (quieter, though). The wheel glazes up very easily, and I clean it off all the time, but even so, it will take quite a while to reshape the bevel.

Re: Grinders Like Tormek, Jet, Grizz, Etc

#4

Re: Grinders Like Tormek, Jet, Grizz, Etc

john lucas

>I have a sheppac wet wheel grinder and it does change the grinding mark sizes after you use the grader stone. It works fine for some tools but for carving tools I feel that I need a grit inbetween the fine grind and the strop. It does give a mirror edge but there are slight lines left in the metal from the fine wheel. I prefer to have a smooth mirror finish on these tools.

Re: Grinders Like Tormek, Jet, Grizz, Etc

#5

JL

Re: Grinders Like Tormek, Jet, Grizz, Etc

JL

>I have the Tormek. Supposedly you are supposed to use their little stone to switch between coarse and fine. Realistically, you don't really need to use it. I get a reasonable sharpness off of the stone. I then hone it with the leather wheel and the honing compound on the other side. This gets it really sharp.

I don't really use it that much though. I use my water stones more. I use the Tormek to establish a general concave edge and then go to my water stones.

Re: Grinders Like Tormek, Jet, Grizz, Etc

#6

Re: Grinders Like Tormek, Jet, Grizz, Etc

John K Jordan

>I use the Tormek extensively with turning tools. They claim the coarse and fine sides of the grading stone fracture the grit particles differently. It's surprising how well this works. Note, however, that even the coarser grade is pretty fine and is not useful for removing a lot of metal quickly.

JKJ

Re: Grinders Like Tormek, Jet, Grizz, Etc

#7

Slow!

Tony - Memphis

>But its rare that I do any heavy shaping, so I can live with it. If you are concerned about speed, I try one out before I bought it. Those things are way too expensive to buy and not be happy with it. I'm happy with the tool, but I still think they are way overpriced.

Tony

Re: Grinders Like Tormek, Jet, Grizz, Etc

#8

Re: Grinders Like Tormek, Jet, Grizz, Etc

howard

>Thanks all - I'm leaning towards the work sharp machine since it gives a wider range of grit size since it uses sandpaper.