Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Source for vintage shaper bits

Posts

Source for vintage shaper bits

#1

Source for vintage shaper bits

David Miller from Iowa

>I have an OLD Heston & Anderson shaper that takes cutters with a 5/8� bore. I need to cut a �� dado 1 1/4� deep and can�t find a cutter. Can anyone point me in the right direction? I have some pieces that allow one to clamp straight tool pieces on to make bits, so I could figure something out that way, except the clamp parts require the sides of the tool to be angled. I could also make do with a small (5� or smaller) circular blade if it had a 5/8 bore, although I would rather have a cutter head.

Any suggestions would be appreciated.


img

Re: Source for vintage shaper bits

#2

Re: Source for vintage shaper bits *LINK*

Bill Earl

>If you can find a 5/8 to 3/4" bushing, there are plenty of 3/4" bore shaper cutters.

The link is one source. I'm sure there are others.


Bushing