Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Band Saw Tire Changing

Posts

Band Saw Tire Changing

#1

Band Saw Tire Changing

Tomm

>I just changed the tires on a Delta 14" band saw with Carter tires. The Carter tires seem to be thinner than the tires that came with the saw. I put a 1/4" blade on the saw and tried to tension it. As I worked the wheel to tighten the blade it stopped before the blade became tight. The graduation indicator was reading just above 3/4" and the wheel would not turn any more. Is there a way to readjust the blade tension system? Thanks for your help.

Re: Band Saw Tire Changing

#2

Re: Band Saw Tire Changing

Paul Murphy

>I had exactly the same experience. There are 2 problems with the Carter tires on the Delta 14" bandsaw:

First, the tires are at least 1/32" thinner than the tires that came with my bandsaw. C=3.14D so there is at least .2" right there.

Second, the tire is not as wide as stock, and will not fill the groove of the wheel. This may lead to tire shift, or a lack of blade support if the tire is fully biased to one side of the groove.

I called and emailed my supplier and Carter over a year ago concerning this issue, but neither company seemed concerned. I did return the tires for a refund, and found full width and thickness urethane tires elsewhere. The full thickness and width tires worked beautifully, and their first test was a bent lamination resaw which I couldn't have been happier with. IIRC I found them at Hartville Tool.

Your other option is to slip a spacer under the end of the tension adjuster. I didn't like having to modify my saw to make a purchased part work, and didn't want the spacer to possibly slip, so I didn't do that.

Re: Band Saw Tire Changing

#3

You would think...

Chris Knob

>... Carter would make these interchangeable with the most used bandsaw in the home shop. Bad move.