Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Handyman

Posts

Handyman

#1

Handyman

Joey, New Canaan, Ct.

>In July, I'll be out of work. The hotel I work in is closing for several months for renovations. I thought about running an ad:

Handyman Joe

Sheet rocking, Painting, Carpentry, Tile work, Electrical, and more...

Local resident you can trust.

Has anyone here tried this experience. I'm looking for guidance, especially in the area of estimating. I want to do a good job, but don't want to be eaten alive hourly. Joey

Re: Handyman

#2

Re: Handyman

Barry Irby

>I am interested in this too. My income as a Home Inspector has taken a real hit. Hoping to supplement it with some part time handyman type work. A friend who does small remodeling jobs tells me he figures his time at $50 to 70 and hour. Can that be true?

Re: Handyman

#3

Re: Handyman

Clint Searl, at the base of Haycock Mtn

>You might want to check CT law to see if you need a contractor license and/or register as a business. If you plan to work under the table, you're taking on considerable liability.

Clint

Re: Handyman

#4

do you commute?....to TN

Bill Tindall, E.TN

>There are a number of things that I would hire someone to do if I knew I could find reliable persons to do them. And I set the bar for frugal and independence. So, if you can get the word out to persons in need I think you will be successful.

Marketing is not a talent I have. That said, I would dress neatly, have a presentable work truck and make personal contact in neighborhoods with older people with money. Also establish wholesale accounts with material suppliers. A business credit card is useful.

Re: Handyman

#5

Re: Handyman

Ralph Lipeles

>Joey,

I am also in CT. I did quite a bit of what you are talking about when I left my job at Norden. However, for me it was a supplement, not a main income. My work was good, clean and reasonably priced. All of it came from referrals. I considered growing the business but did not since I had some other income. My recommendations for obtaining business are as follows. You are in a very affluent area. Make a good looking mailbox stuffer and distribute it. As business grows, assemble a picture book of the bigger/more complex jobs to help sell the type of work that you do. Visit small condos and small office buildings. They always need help but don't need a full timeer. Lastly, get a contractors license. They are very easy to come by in CT and I missed out on several condo/office condo jobs because I did not have a license. You should also make it clear that you have your own liability insurance and medical insurance.

Ralph Lipeles

Re: Handyman

#6

Estimator *LINK*

Grant in Iowa

>Here's something I ran accross at Home Depot. An estimating tool. Not sure how effective it is, but just thought it might help get you in the ballpark.

FWIW,

Grant in Iowa


Homely Depot Estimator

Re: Handyman

#7

Re: Handyman

Chuck in ND

>I agree with Clint and Ralph, you need liability insurance, one simple accident on someones property could cost you ALOT of money.

Re: Handyman

#8

Re: Handyman

Gary Evans Tallassee, TN

>Hi Joey,

I've done this kind of work off and on for years. While people are most comfortable with an estimate up front, I've found it works best, especially till you get comfortable with estimating, to just set an hourly rate that works for you.

People will understand that remodeling is not like new construction where you are working in an uninhibited, uninhabited space and you can see exactly what you have to work with. Very few surprises in new construction. Surprises are the norm in remodeling. The guy who was mentioned who is figuring his time at $50 to $70 an hour is probably averaging out at around $25 to $30.

Bill Tindall,

Where are you located again? I might be willing to do some commuting. I'm south of Knoxville.

Gary

Re: Handyman

#9

Re: Handyman

Fred Davis

>Joey,

like someone said , get your contractors license, stay away from electrical, mechanical work and plumbing if more then a very minor nature.

Put your name in at lumber yards, building supplies, Real Estate firms, paint stores, interior decorators, do not advertise as a Jack of all trades.

Have a business card and the one outstanding feedback I got from clients was, they gave me the job over others because I was the only contractor who gave them a firm estimate based on the information they gave me and I observed at their job site, while I was there the first time.

This is appreciated by people who put off remodeling for years and then want a cost estimate and when can you start and when will you finish right now.

Retired General contractor

FredD

Re: Handyman

#10

Re: Handyman

Randy Johnson Connersville IN

>I suppose it would depend on where you live but.......

A friend of mine who lives in Fishers, IN (almost a suburb of Indianapolis)does some pretty high end carpenter work and what he mentioned as an hourly rate was well under fifty bucks an hour. Of course, he have just been reluctant to say what he really charges. He uses a service I've heard advertised but can't think of at the moment where references are available.

Re: Handyman

#11

Re: Handyman hourly rate

Glenn Madsen near San Francisco

>What you figure to estimate jobs, and what you actually earn in the doing of the job are two entirely different animals. An estimate rate has to cover a lot of 'overhead time', time that doesn't have an attached charge to the customer...

Re: Handyman

#12

Be prepared to learn a lot about people

Bill Houghton, Sebastopol, CA

>Our younger son does carpentry/electrical/plumbing when he must.

He's currently billing $35 an hour, although I think he could go higher. In my humble parental opinion, he does very good work; he's done some for us, and I've been delighted by the quality and thoroughness.

There are many very good clients who pay promptly and understand that good work takes time; then there are the others. He had one client who, when he wore out a sawblade on a particularly tough demo job, argued that he (the client) should not have to pay for time spent changing the blade (and our son usually doesn't even charge for the blades used!).

He bills weekly for jobs, on Friday, regardless of whether he's got just one day left the next week.

Be clear with people: this is what you've asked for; changes will take longer and cost more. Otherwise, people will propose to pay you the original price (for a 10x12 garden shed) for a job that's turned into a second garage.

Re: Handyman

#13

Short true story

Lee Schierer - McKean, PA

>I was called by a friend of a friend to see if I could repir a bathroom vanity.

I went to the house and met the lady. She showed me the vanity and explained what she wanted. It was a custom made plywood vanity with really cheap metal drawerslides that had worn out several years before and the wood had been chewed away from the lack of rollers. The plywood was delaminating from the high humidity and her child had pulled off several pieces of surface mateial, some of which had been glued back on poorly. The finish was stain with what appeared to be a thin coat of shellac. I took some photos and some measurements and promised her an estimate.

After thinking about the job, I determined that the easiest way to resolve the problems would be to replace the vanity with a new one, because removing or covering the face frame, making new drawers and installing new drawer hardware was going to be a huge time consuming project if done on the installed vanity and she woudl still have a 20+ year old beat up vanity frame.

I went back, reviewed the estimate with her, but she also noted that the second vanity outside the bathroom might not match and the laundry chute and linen cupboards would need to be repaired and might need refinished as well. So off I went and did a second estimate and drawings to figure materials.

When reviewing that estimate with her, she was a bit overwhelmed by the projected costs. She later reviewed it with her boyfriend and he felt I was ripping her off so she wanted to go back to her original plan of just doing the bathroom vanity face frame, but rebuiling the nailed together plywood drawers with new fronts and slides and she would do the finishing. I figured that this plan was going to get me a bad reputation no matter what I did, so I politely declined. She called twice asking for additional quotes. I declined those offers as well.

She was obviously looking for Ethan Allen Quality for a Walmart price and was getting advice from her boyfriend who obviously couldn't do it himself since he lived there part time.

Lee

Re: Handyman

#14

You've gotten a lot of good advice

Neal in San Jose

>As a retired General Contractor, I can't agree more about getting your license and insurance.

A fellow I knew chose to go without both, and he did a small job involving moving a washing machine out of the way, then back into place. Unknown to him and the homeowner, the drain hose fell off the back of the machine. Mrs. homeowner later started the washing machine and left the house to do some shopping. The resulting $30,000 damage was all charged to my acquantaince and that was before the Contractor's License Board fined him for contracting without a license. He lost his home. I could go on; be careful out there.

Re: Handyman

#15

Re: Handyman

Joey, New Canaan, Ct.

>Next stop license and insurance. Thanks for all the great advise, Joey

Re: Handyman

#16

Just call it something other than Handyman

Dave Bair, Eaton Rapids, MI

>Like Joey's Home Services or Joey of all Trades . Anybody else here learn to read using Dick and Jane (and Handyman Zeke)? Always thought the handyman term implied a marginally intellegent character who eked out a living repairing toasters.

Re: Handyman

#17

Re: Amen!

Glenn Madsen near San Francisco

>What you call yourself in your marketing will influence the jobs you are offered, and the rates you can earn, regardless of any other factors. Find something that matches your market and your skills, and sell that notion.

And best of luck to you!

Re: Handyman

#18

Great story; made me smile

Clint Searl, at the base of Haycock Mtn

>

Re: Handyman

#19

Expand on this, Please......

Barry Irby

>Give some examples of names for a small repair service that seem classy or upscale. Just want to know what sounds good to you.

Re: Handyman

#20

My old company was called.......

Richard Jones

>HandiWorks

Blend of old and new, plus the play on words, most folks thought it was pretty slick. It did get me through a really rough financial time.

Rich

Re: Handyman

#21

Re: Handyman

jared

>There is always a demand for this type of work. I farm and so have a lot of spare time in the winter. For about 5 years I kept myself busy all winter doing odd job carpentry for people. Most of it was small jobs that regular contractors had no interest in doing and I cant say that I blame them as they had bigger fish to fry. People were generally thankful to find someone who would do small jobs of sheetrocking, interior finish work, hanging a couple of doors etc. I probably didnt charge enough per hour but always made sure I charged for travel time, getting materials and loading and unloading tools. I never had anyone complain about the cost, they were usually just glad to get it done. If you can do ceramic tile there are always people looking for someone to install that too. All of my work came from word of mouth referrals. I never advertised. I did turn down a few jobs that I knew who the people were and didnt want to get involved with them. good luck jared

Re: Handyman

#22

Re: Handyman

Justin Szeliga

>I do work ranging from the odd set of custom cabinets to the most ridiculously small repairs, a bit of plumbing & electrical replacement work, meaning I avoid running wire & pipe. I tell folks you have your choice of 2 out of 3 of the following- Good, Fast, & Cheap. Good & fast isn't going to be cheap, good & cheap won't be fast, & fast & cheap won't be any good.

Peace

Justin

Re: Handyman

#23

Re: You've gotten a lot of good advice

Fred Davis

>This is for Bill's son who is flying blind in California and doesn't know it .

In addition to what Neal said , that state which I contracted in for well over thirty years has a State law that in plain English says...

IF you do a job requiring a contractors license and that used to be anything over 600.00 , but has been revised downward I believe, you cannot collect material and labor costs regardless of how well you did the job, if the client complains or refuses to pay you, they can legally rip you off and you will get in even more trouble if you try to collect.

In addition to that , if your observed by a licensed contractor doing work in his field , he more then likely will report you to the Registrar of Contractors in Sacramento because he is paying all of the fees associated with contracting and your son isn't.

Not fair to the Contractor or to the client who has real avenues to get a shoddy job corrected though the Consumer affairs department of the State.

And in addition to all of that , if he did work requiring a building permit and didn't get one , because he knows the Building department will want to check his license to see if he is good standing, then the proverbial crap really hits the fan.

One other thing about a client who refuses to pay because he knows he doesn't have to ,he also can, in addition, collect all costs associated with getting a licensed contractor to do it over.

Think about it.

So to avoid all of that grief either get legal or get another way to make a living.

FredD

Re: Handyman

#24

Re: Expand on this, Please......

Glenn Madsen near San Francisco

>I think you want something that defines what you do. What you can do, have done, are willing to promote as something at which you're skilled.

If you want to try to cover everything, then it's a more difficult marketing pitch, but a modernistic name will help there.

I have a buddy who named his business after the moulding & trim work he did, but he does a much wider range than that now. Does his business name limit him? I don't know. But he's not a handyman when he's marketing.

Re: Handyman

#25

Re: Expand on this, Please......

Fred Davis

>Glenn ,

you may remember this , it happened in San Francisco in the seventies.

there was a Disco that was about to go under because it wasn't attracting enough customers.

Someone Referred them to a Attorney who had a hobby of dreaming up catchy names for business's and even a car model or two.

He also made a lot of money doing it.

So presented with the Disco's problem, he came up with this solution.

He said call it "Dance Your Ass Off" , so they did and the customer's flocked to it in droves. ;-))

FredD