Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

inscribing a name------WebKitFormBoundaryT4M+HroUL

Posts

inscribing a name------WebKitFormBoundaryT4M+HroUL

#1

inscribing a name------WebKitFormBoundaryT4M+HroUL

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>What's a good, simple, reasonably foolproof way to carve lettering in a board? (Maybe there isn't one.) I don't mean a burned signature, as many turners do on the bottom of their pieces. I mean something considerably larger-- perhaps each letter dime size -- and cursive. I don't have a pin router( and I certainly don't have one of those computer controlled $7500 machines.) So is there a relatively simple way? It's fancy wood, and I don't want to ruin it.

------WebKitFormBoundaryT4M+HroULw9AxQ5I

Re: inscribing a name------WebKitFormBoundaryT4M+HroUL

#2

Re: inscribing a name------WebKitFormBoundaryT4M+H

pecker

>You can print the lettering onto a white Avery label. Affix the label to your wood, then use a Dremel tool with a 1/16" or even a 1/32" engraving bit to trace over what you've printed.

If you don't have a Dremel, there are inexpensive engraving tools that use these same type bits.