Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>30 Mar 2009

Wow how time flies when you're having "fun". :-)

Being working a good bit at the day/night job and trying to spend time with the family as well. It's been fun and interesting.

Anyway, I'm still working on the restoration project of the antique school desk. I get to start working on the actual woodworking part of this project today and with some patience, I'll be able to get all new pieces made for the seat and back of this old desk. It's a pretty good challenge since I have only a few pieces of the old wood to go by. I guess some would say that I'm a real sucker for "punishment". Oh well, at least it keeps the brain cells moving. :-D

Well, that's it for me, so what did you do this weekend?

Best of weeks to you all.!!

Dennis

Re: WC Weekend Accomplishments....

#2

Weekend went fast

Lee Schierer - McKean, PA

>We had a fast weekend. We started with a pancake breakfast with fresh maple syrup at a local fruti farm, then off to my mothers to dismantle her blueberry cage that collapsed due to the snow weight last winter. Rebuilding it will take anotehr day. From there it was back home to build an oak step stool for a comission job. It has to be done by next weekend so it can get transported to the new owner. I also managed some work on the corner entertainment center I am making for us. Finally Saturday evening we went to a Pheasant Forvever banquet. The food was great.

Sunday we went to church, ate dinner, watched a bit of round ball, took the dog for a long run, got soaked by the rain and worked on the stool and EC.

Lee

Re: WC Weekend Accomplishments....

#3

Applied Beading to Door Panels

Hank Knight

>The hunt board I'm building has two frame and panel doors. Each door has two panels. The frames have an applied bead around each panel opening. There are sixteen miter joints to fit. I got the beads applied and fit 12 of the sixteen miters this weekend. It was all hand work with chisels and a miter block. So far, so good. The door frames look ugly at this point. They are stained dark red. They'll have black milk paint applied and then rubbed off and finished with BLO and wax. The beads and the door panels are curly cherry will be finished with Waterlox.

Hunt Board Doors

Hunt Board Doors

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Bill Earl

>Finally finished a long overdue geta-bako (shoe cabinet) for the front hall. 54"H x 48"W x 21"D. Hondouras mahogany, purpleheart and curly bubinga veneer.

The biggest lesson I learned on this project was: never, never, ever use cheap Chinese plywood. It is more trouble than it is worth. The most perfectly flat sheet that has been acclimating in your shop for months will warp like a taco as soon as you cut it to size. And as good as it might look on the surface, it is full of voids that will sag in the vacuum press or dimple and pucker as soon as you apply a finish.


img

Re: WC Weekend Accomplishments....

#5

Alan Young

Re: WC Weekend Accomplishments.... *LINK*

Alan Young

>My Weekend accomplishments pale in the light of what my friends and family are/have been battling back in the Red River Valley in Eastern ND and Western Minn.

Here's my brothers "To Do List"


Waters are leveling off and we are thankful for that but much is too be done and still prepared for. Here are a few shots my brother sent me from around the family homestead south of Grand Forks...

This lovely little coulee has risen out of its banks and encroaches on the back side of the homes of my brother, my Dad and my sister.








Crest predictions are at a manageable level for the Grand Forks area but The situation in Fargo continues to have potential dangers as a winter storm is expected to move in today. High winds have the ability to whip up waves that may put pressure in sand bagged dikes.

More at the link here:

Alan


Fargo Flood News

Re: WC Weekend Accomplishments....

#6

Bart Goldberg

Re: WC Weekend Accomplishments....

Bart Goldberg

>Hi Bill,

I assume your use of this cheap plywood was for a substrate for your veneered panels. I'm somewhat of a novice at veneering, but I typical use 1/4" MDF for the substrate of my veneering work. I've never had a problem with it - its stable, flat, smooth, cheap and readily available.

Bart

Re: WC Weekend Accomplishments....

#7

Built Another D-Handle Router Base

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis, and a Happy Monday,

I've been squirming and figiting for days seeking flat work to do while the weather calmed and warmed. My attempt at outdoor sanding was rewarded with a broken sander, and there is yet one more side of the headboard panel which needs it. I decided to produce an upgraded D Handle base to use with one of the P+C 690 motors I have. Thanks to dialog involving Serge and Carol, I was spurred on to a successful effort. My newest base accommodates the P+C sized collar insert. Today, Charlie dropped by to help aquire 53 bf red oak for a kitchen table for #2 daughter. Heacock lumber is over 40 miles away. I did it over rough roads, too much coffee, diuretics, and agony. Had a Family dinner party last night and we had a fine time. Have a great week Dennis.

George

Re: WC Weekend Accomplishments....

#8

San Antonio River Walk

Pat Evans

>Spent the weekend in San Antonio. The Riverwalk area is quite an oasis in the middle of a huge city. It was our first time in Texas. No woodworking.

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Brad Genet - O'Fallon, MO

>Helped a friend install a woodworking vice on his workbench.

Re: WC Weekend Accomplishments....

#10

Sweet work, Hank

Ellis Walentine, Host

>Be sure to keep us posted on your progress.

Ellis

Re: WC Weekend Accomplishments....

#11

Thanks, Ellis. I'll Keep you posted.

Hank Knight

>

Re: WC Weekend Accomplishments....

#12

Where'd you get the design?

Barry Irby

>Those doors look similar to my doors which came from FWW a year or two ago. Any chance your design is based on the one by Garrett Hack?

Re: WC Weekend Accomplishments....

#13

Re: Where'd you get the design?

Hank Knight

>Hi Barry.

Yes, it's the same one. It's the first project I've ever built from somebody else's plans. Hack did a good job with it. I hope mine turns out well.