Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Wax Finish

Posts

Wax Finish

#1

Wax Finish

Ed F.

>I'm finishing up a sofa table. Ash with General Finishes gel stain and Minwax Tung Oil. Would paste wax add anything as a final step? Any recommendations?

Thanks,

Ed.

Re: Wax Finish

#2

Makes it nicer to the touch

Dave Andeson (PacNW)

>

Re: Wax Finish

#3

Re: Makes it nicer to the touch

jerry mayfield

>If you are asking does it offer any protection against water,water vapor or abrasion the answer is no. As was stated helps the feel and some offers a pleasant aroma.

Re: Wax Finish

#4

Re: Wax Finish

Jim Dillon

>Ed,

I started using wax several years ago, generally as the last coat on a multicoated oil/varnish finish. I really like the feel of it, as well as the smell. I use a dark wax on dark woods (mahogany, walnut), and a clear wax on lighter woods (cherry, maple), and really think it adds to the look of the final finish, especially for the dark woods. But I do not depend on it for real protection of the wood. Hope this helps.

Jim

Re: Wax Finish

#5

Wax on..wax off...

Tony - Memphis

>Sorry, couldn't resist. Wax is always my final finishing step. Why? Well, I always like to rub out my finish to get rid of any dust, etc. and get that smooth to the touch feeling. I use 0000 steel wool usually (Liberon - great stuff). That dulls the finish a bit and a coat of wax brings it back to the level of shine that I like. And it feels silky smooth to the touch. I use Minwax paste wax and that way too expensive wax that comes in the real small can that I can't think of right now....nope, still can't. It is sold as a micro crystalline wax? Good stuff. Some folks actually apply the wax with steel wool. I've never really liked doing that, but I tried it to see. Make sure you give the finish time to cure well before you wax (if you choose to). Sometimes, the thinner in the wax will mess with the finish if it is still soft.

Tony

Re: Wax Finish

#6

Re: Wax on..wax off...

Ed F.

>Do you do the rubbing out and/or the waxing strictly with the grain or is it ok to rub in circles like waxing a car?

Thanks,

Ed.

Re: Wax Finish

#7

JL

Renaissance Wax?

JL

>

Re: Wax Finish

#8

Re: Wax on..wax off...

Jim Dillon

>Ed,

I just rub in small circles with a piece of soft cloth, although I have also read about applying it with 0000 steel wool. Haven't done that yet. Do a small area first to get a feel for how long it takes to dry. What I have used (Mylands, Old Town) drys in 2-3 minutes tops. If you are getting a lot of drag with your cloth and you see your cloth is actually removing the wax per se, then wait a bit longer. Tony was probably thinking of Renaissance Wax, a very highly crystalline wax that provides a very hard finish. It is expensive, though a little goes a long ways. It only comes in clear, I think. I use it on my TS/jointer/planer beds to keep them slick. As yet, I have not tried it on finished wood though it should work very well. Oh yes, like another poster said, I also let the furniture finish cure for several weeks before applying the wax. I like the Old Town wax as it has a lavender smell and is great for jewelry boxes etc.

Jim

Re: Wax Finish

#9

Re: Wax Finish

Clint Searl, at the base of Haycock Mtn

>Don't waste your money on expensive high-falootin' named wax concoctions. None of them provide any added protection or durability. Butcher's or Johnson's paste wax rubbed in with 0000 steel wool and buffed with old toweling leaves a nice glow with great tactile feedback on top of any finish.

Clint

Re: Wax Finish

#10

But Johnson's stinks and

Dave Bair, Eaton Rapids, MI

>I've come to hate that odor. I switched to Minwax because of that and found it to be easier to apply and a lot harder finish. The Johnson's goes on the saw and jointer iron.

Re: Wax Finish

#11

Re: But Johnson's stinks and

Glenn Madsen near San Francisco

>Butcher's Bowling Alley wax was the first one I bought, close to ten years ago. Smells great, and there's still a third of a can left.

There are another 5 cans on the shelf of various others, colors, mixes and aromas. You have options.

disclaimer: I have NO IDEA what Johnson's smells like...

Re: Wax Finish

#12

Re: But Johnson's stinks and

Fred Davis

>Butchers bowling alley wax is misnamed , they oil bowling lanes , not wax them, the oil patterns even have names and different areas of the alley they cover.

FredD

Re: Wax Finish

#13

Re: That's OK, Fred

Glenn Madsen near San Francisco

>I don't have a bowling alley anyway. ;-)