Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

shepherd's crook

Posts

shepherd's crook

#1

shepherd's crook

John K Jordan

>I was asked to make a couple of shepherd's crooks for a Christmas play. I suspect a working staff would be made from a tough green wood bent into shape, perhaps with some steam help. Since these are just for show and don't have to be strong, I thought it would be easiest to bandsaw the shape from a board then round with a spokeshave or a belt/spindle sander.

Any thoughts?

Dimensions?

(BTW, I have a working hook at the barn for catching lambs and goats - it's a small hook made from cast aluminum fastened on the end of a pole. However, it's not the larger, traditional hook but a small hook made for hooking legs. Works on chickens, too!)

JKJ

Re: shepherd's crook

#2

Dale Lenz

Re: shepherd's crook

Dale Lenz

>One drop and the curve part will break, I'd think. How about using plywood, fill the voids and paint.

Re: shepherd's crook

#3

Jesper, Denmark

Re: shepherd's crook

Jesper, Denmark

>Styeam bend thin plies in a form. If you use a water activated glue, like Weldwood or PU, you can glue directly after bending.

You need 7 laminations to avoid spring-back.

Shape to round form after they have dried.

Since it si spring and a looong time till Christmas, you could force some straight growing branches of some bush or tree into the right shape over the summer. Bend the branch as much as you can without breaking and tied together. Leave for a week or so, then bend it some more. Continue till you have the result you want, then harvest the branch and let dry in the right shape.

If nothing else, you will get a lot of silly questions over the summer!

Re: shepherd's crook

#4

I used electrical conduit

Tim Greif - West of Chicago

>I did the same for the Christmas play at church a number of years ago. Made it out of electrical conduit. Just play with a bender to get the right shape and paint it goldish/brown. They still use it today.

Re: shepherd's crook

#5

Re: shepherd's crook

John McGaw

>I would certainly consider the abuse that the crooks will be exposed to. It is likely that they will wind up in the hands of children and it is a well-known fact that a child can break an anvil. Making the crooks from bent riven hickory would be my first choice.

Re: shepherd's crook

#6

Re: shepherd's crook

Barry Irby

>I'd make it by setting up a form in the shape I wanted and bending the crook out of a bunch of thin plies. Just the crook. I would then join that to a stick. I might pick a reasonably straight stick out of the forest and use that if I wanted a natural appearance or just make one if I wanted a really straight one.

What I did on my attempt at something similar was to cut an end on a blank that had a long tongue and two shoulders and cover that with wax paper. I clamped my plies to that and then bent them around the form. Once the glue set, I removed the blank and installed the long handle that had the same end cut on it. Obviously, you could install the handles at the glue up, if they were ready.

The reason I only laminated the curved part was I could not see any reason to laminate the long straight part and I was not sure I had enough clamps. Seemed efficient at the time. Not so sure.

Re: shepherd's crook

#7

Re: shepherd's crook

Terry Quiram

>Look for Willow growing along a stream. You can cut them now and bend them around a form to dry.

Re: shepherd's crook

#8

Steam Bend Bamboo

Al Kapocius

>Been ponderin' this 'un a while for fancy tomato stakes. I'm thinking to pick up a bundle of bamboo stakes and steam bending them on a form. Even thinking about an extra hook on the end for one of those fancy planter hangers. Only caution is to pick a bundle of bamboo stakes thick enough.Al Kapocius

Re: shepherd's crook

#9

JL

John, I'll make you a couple if you give me the..

JL

>dimensions. I can rough shave them and bend them on my next bending "spree". I am presuming you'll be down to Folk School sometime before a while.

Re: shepherd's crook

#10

thanks for all the ideas! JL...

John K Jordan

>Although these don't have to be functional, stronger so they can take accidental abuse is a good idea.

JL, if you have the time, your expertise would be massively appreciated. I'll be at JCC the week of May 17th for Frank Penta's platter fun. But it's less than a 3 hour drive so I could easily come that way later in the year. I volunteered to come up with something, but I'd gladly trade something for your time - turning stock, green or air-dried lumber from the sawmill, honey from the hives... I'm bringing a couple of 2" thick cedar slabs for Frank for platter stock - does that interest you? I also have more dry hickory, air dried and green cherry, walnut, oak, pine.

I don't know dimensions - that's one of the questions I had in my first message. I tried to find that on the web but didn't - I'll look for photos with people holding crooks to estimate the size. As props, if they look right the are right!

JKJ

Re: shepherd's crook

#11

Re: thanks for all the ideas! JL...

AZ, Colorado Springs

>As for dimensions, probably make 'em so they're the same height as the kids or adults that will be holding them. If they're going to be used year after year, kind of guess at the age group. The loop should probably be roughly the size of the head of the person holding it.

Also, how big is the auditorium? Generally, you'd want to err on the tall/long side, and make them pretty beefy (not 5/8" dowel rods), so the audience gets a better view of the prop. But also be aware of the size of little kids' hands.

For colors, you want them to complement the other scenery, but not be hidden or masked by the background. If the scene has a large creche behind it, a dark brown shepherd's crook might disappear. Obviously, you won't make it fluorescent orange, but don't let your craftsmanship become invisible. either.

Just some thoughts. In the end, it all comes down to presentation ...

Re: shepherd's crook

#12

JL

John, I'll try to have at least one ready..

JL

>by the time you get here.

Re: shepherd's crook

#13

Re: John, I'll try to have at least one ready..

John K Jordan

>JL, Thanks! Perhaps I can come visit your place this time.

AZ, good ideas! I think they are for adults, but I'll check.

JKJ