Weird wood floor question........
Jesper, Denmark
>I live in a house built around 1924. The original wood floors are still there in most places, particularly in two adjoining rooms - living room and the old dining room - which have a double door between them - always open.
The floor�is tongue and groove pine, which has been treated in many ways over the years, but at some time were sanded down to bare wood. They still are bare wood, which gets treated occasionally in the traditional way by scouring with a strong soap solution and then dried. The soap leaves a slightly "soapy" film, which prevents spills and dirt to get into the wood.
Here is the question:
The planks are all flat sawn and laid down with the pith side (center of the tree) up. Contraction from heating over the years and the frequent washing have caused them planks to shrink, so there are gaps of between 1/8 and 1/4 inch between the planks and the edges of the planks curl up. The gaps naturally collect whatever crap is around.
One thought is to ream out the gaps down to the tongue and fill something else in them. Sorta like caulk the deck on a boat. I suppose I could rout out each gap to make them all the same size or close to it.
Any suggestions to a suitable compound, technique or other ideas?



