Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

OT - Briggs and Stratton ignition

Posts

OT - Briggs and Stratton ignition

#1

OT - Briggs and Stratton ignition

Bill Houghton, Sebastopol, CA

>I've got an industrial/commercial Briggs and Stratton 8 hp motor, on which the ignition seems to have stopped igniting. I haven't opened it up yet, but, from the graphics, I suspect it's points ignition. Do all the B&S motors use the same points, or do the commercial ones use something different?

Re: OT - Briggs and Stratton ignition

#2

Jason Roehl in Lafayette, IN

Re: OT - Briggs and Stratton ignition

Jason Roehl in Lafayette, IN

>If it has points, there is probably an electronic replacement. Get the replacement...points are junk.

Jason

Re: OT - Briggs and Stratton ignition

#3

Re: OT - Briggs and Stratton ignition

Gene Gauss

>I have a log splitter with an 11HP B&S engine. The points would go bad each summer while it was being stored. Sometimes the mice helped. I replaced the points and condenser ignition with an electronic unit last fall. It was about $45, and bolted on without having to remove the flywheel. Just cut the wire to the old points and condenser and install the electronic.