Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

OT Anyone used a Corner trowel on drywall?

Posts

OT Anyone used a Corner trowel on drywall?

#1

OT Anyone used a Corner trowel on drywall?

Barry Irby

>I've seen the trowels set up to do both sides of an inside corner on drywall. Somehow they look like a gimmick to me. Has anyone used one? Did it work well for you? Or is it easier to do it the old fashioned way with a straight knife?

Re: OT Anyone used a Corner trowel on drywall?

#2

Re: OT Anyone used a Corner trowel on drywall?

Ken Oakley-Sunny St. Cloud, Fla.

>I used one years ago--Still have it. Takes a lot of practice to get it right. Then it does a good job. Won't cut the tape in the corner like the straight knife does.

Re: OT Anyone used a Corner trowel on drywall?

#3

It's all in the wrist

Clint Searl, at the base of Haycock Mtn

>I use one whenever I'm cornered.

Clint

Re: OT Anyone used a Corner trowel on drywall?

#4

Re: OT Anyone used a Corner trowel on drywall?

Steve Marino

>I just use the corner trowel to set the paper corner tape in the mud. I then recoat using a standard 6" straight knife on each side.

HTH,

Steve

Re: OT Anyone used a Corner trowel on drywall?

#5

There is a learning curve but both work

Wayne Carson

>But if you use the straight knife and know how to use it it is faster than the corner trowel. with the strieght trowel you need to let one side dry then do the other unless you have had years of use so you don't gouge the inside corners or expect to fill after.

Re: OT Anyone used a Corner trowel on drywall?

#6

Re: OT Anyone used a Corner trowel on drywall?

Dale Warder

>I use a corner trowel almost every drywall job. They work well, and require little practice to use effectively. Much easier than using a straight knife. Good luck.

Re: OT Anyone used a Corner trowel on drywall?

#7

Re: OT Anyone used a Corner trowel on drywall?

Fred Davis

>Dale ,

during a lot of years watching drywall guys work for me, I thought I had seen all of th techniques for taping until I came home to Abilene and put up a new shop .

The taper used a Hawk and a 12 " MarshalTown extralite to mud the tape in and then stepped up the trowel size two more times until he was using a 18" on the top coat.

Worked like a charm, reminded me of plaster trade .

FredD

Re: OT Anyone used a Corner trowel on drywall?

#8

Re: OT Anyone used a Corner trowel on drywall?

Jim Dillon

>Barry,

I've used it for occasional drywall jobs around the house and it works but does take a little practice - at least in my hands. I like the way it fills in the open seam. I sometimes follow it up with a light touch up with a slightly wet sponge, but that is because I really don't know what I'm doing most of the time ;-).

Jim

Re: OT Anyone used a Corner trowel on drywall?

#9

I prefer a straight knife...

John in NM

>And thin, thin coats of hot mud rather than bucket mud. But that's just me. I would guess that the corner trowel works best when the corner is near to square... a lot that I've done were easily 5 degrees or more off. Not the majority, but enough to be annoying if the tool depended on being close.

Re: OT Anyone used a Corner trowel on drywall?

#10

Abilene Kansas or Texas? (Just curious)

Terry Alexander

>

Re: OT Anyone used a Corner trowel on drywall?

#11

Have Two

Mark Mandell - Gone Round In Jersey

>#1 is the 110� bent style you're talking about.

#2 (my fav actually) is a high-temper thin sandwich affair that is a flat wedge shape made up of two sheets of thin spring steel with a bit of closed-cell foam in between. When pressed into the corner, the wings flex to conform and bury the tape nicely without cutting the corner and leaving a nice 1/8" diameter round seam. Unfortunately, I've not seen them in 20 years so I assume they're no longer made.

Re: OT Anyone used a Corner trowel on drywall?

#12

And you can't buy repair parts either!

Wayne

>

Re: OT Anyone used a Corner trowel on drywall?

#13

Re: Abilene Kansas or Texas? (Just curious)

Fred Davis

>Think Wild Bill Hicok, President Eisenhower ;-))

FredD

Re: OT Anyone used a Corner trowel on drywall?

#14

Re: OT Anyone used a Corner trowel on drywall?

Robby Wright in San Marcos, CA

>I have used both. The corner trowel works well and is easy to learn. A straight knife takes practice.

The big trick is to thin your drywall compound to the consistancy of thick Bisquick. It is much easier to work than the thick stuff you buy in the five gallon bucket used straight.

Robby W.

Re: OT Anyone used a Corner trowel on drywall?

#15

Re: OT Anyone used a Corner trowel on drywall?

Steve in Denver

>I used both when I finsihed my basement, that was my 1st large drywall project and the results looked fine. I was glad to have them both. Pros may have a different opinion, but for someone who doesn't do drywall for a living they're very handy.