Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

need parts for jet bandsaw

Posts

need parts for jet bandsaw

#1

need parts for jet bandsaw

-e-

>my old jet bandsaw, jbs-14cs has a broken lower support bracket (jbs14-55). the cheap zinc casting just crumbled around the bolts -- guess it's metal fatigue. (i know how it feels).

i've perused the net looking for parts without success, and the jet site doesn't even list parts for this model.

anyone have suggestions on finding parts for old equipment?

Re: need parts for jet bandsaw

#2

Re: need parts for jet bandsaw

Barry Irby

>Try Louis Iturra. He has a catalog that is worth the money. Very knowledgeable about bandsaws. Does not have a web site. Maybe you can Google for a phone number, but I suspect some kind sole will post it for you. Someone better organized than I am.

Also, try the Old Woodworking Machines site. Again, I am not organized. Had both of these stored, but the harddrive crashed. Still realizing what went away.

Re: need parts for jet bandsaw

#3

Iturra

Ken Oakley-Sunny St. Cloud, Fla.

>Toll Free 866-883-8064

Email--KALL@comcast.net

Shoulda bought a Delta.

Re: need parts for jet bandsaw

#4

Re: Iturra

-e-

>thanks for the number --

yes, in 1980, jet WAS the cheap knockoff for delta with cheap zinc-casting potmetal parts. it wasn't made to last into the 21st century.

i've just made a temp patch for the lower bearing guide -- i molded some acrylic around the broken tab -- then filled the casting with west system epoxy -- cured, drilled some holes through it and just mounted it.

it's not going to hold for long -- but for a temp patch, so far so good.

wonder if i could make a mold of the part and cast it in aluminum? anyone cast their own parts?