Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Tool identifying markings?

Posts

Tool identifying markings?

#1

JL

Tool identifying markings?

JL

>Tools walk - they just get up on their little legs and follow strangers home. Particularly screwdrivers and wrenches.

Anyway - to minimize tools straying, I'm looking for a reasonably permanent marking system. I've used fluorescent green paint on occasion. Another thought is the vinyl or plastic coating - but I haven't really used those. (http://www.plastidip.com/home_solutions/Plasti_Dip)

Any thoughts?

Re: Tool identifying markings?

#2

Re: Tool identifying markings?

Tom MacGregor

>I've used colored electrical tape to flag specific tools, such as the one 11/16" open-end wrench thin enough to remove the nosepiece of my pneumatic rivet gun. It's cheap, renewable & doesn't do anything permanent to the tool. I also have a small clipboard with a sign out sheet for stuff I lend on purpose.

Re: Tool identifying markings?

#3

Re: Tool identifying markings?

steve mackay

>My tools, My books, my wife. The first two no other human gets near. Don't care if its my mother. They are returned to their secure enviornment when not in use. No exceptions. I never have the need to prove that is my tool. Now, the third on the list . . . well, some things you take on faith.

Re: Tool identifying markings?

#4

JL

These will be Theatre tools..

JL

>not tools of mine. I just want to make sure nobody walks off with them.

Re: Tool identifying markings?

#5

Re: Tool identifying markings?

George@Colonel's Workshop-Havertown PA

>Good Morning JL,

My #3 son is a contractor, and has had tool walking problems in the past. Ken has begun to use flourescent spray on all tools taken to the job site. He has his own standard color, which he uses exclusively. He says there are more honest people there than thieves, and they all tend to associate a marked tool with its rightful owner. And the ugly spray paint permits him to quickly identify his assets amid a pile of others. Spray paint sure makes them look ugly, though.

George

Re: Tool identifying markings?

#6

Re: These will be Theatre tools..

steve mackay

>Yes Sir, but even with marking, once I've walked out with it its a done deal. I learned in the ARMY that the only way to stop "walking tools" is to make it YOUR tool. Sign-out, sign-for (hand receipt), sign-over (temp-receipt). There are thousands of pawn shops loaded with tools and equipment "marked" with ARMY unit markings. The only way to stop it is to lock it.

Re: Tool identifying markings?

#7

Re: Tool identifying markings?

Bricofleur

>As books, I lend only tools that I don't mind if they won't come back. These are old, dirty, cheap, painted, crooked, dull, etc...

Best,

Serge

Re: Tool identifying markings?

#8

Re: Tool identifying markings?

Fred Davis

>Well Insurance is no help either.

I was running work for a framing contractor in San Jose who had a serious theft problem, linked I believed to some of his and his pardners drinking buddies.

So one Friday afternoon he and his paranoid drunken pardner were having the usual tantrum about theft, so I asked him to call his liability Insurer for a quote.

He made the call and instantly was informed the yearly premium would be equal to the total value of his previous years losses !!

That was in the neighborhood of 2,500.00 in 1974.

He passed and made my practice of issuing saws and saw cords to Carpenters tied directly to their job and if they took the tools home as some would , like the layout man , they were held responsible, a company policy.

Naturally this was a violation of Union work rules , but we figured so what.

FredD

Re: Tool identifying markings?

#9

My uncle worked for Southern Pacific

Bill Houghton, Sebastopol, CA

>which was in the habit of throwing out a lot of tools that had once been useful but no longer (example: breast drills, useful before efficient corded drills, silly in a production environment after).

My uncle tended to stand near the dumpster on throw-out days, and, as a result, owned a lot of tools marked "S.P.," which he always claimed stood for "Sacramento Plumbing."

Re: Tool identifying markings?

#10

Re: Tool identifying markings?

charlie belden

>PINK paint!

A guy will only borrow a PINK tool if he REALLY, REALLY, REALLY has to. And when he's done with it, getting it back to you before anyone sees him with it will be a priority for him. Daisies and Hello Kitty stickers will probably work as well.