You've heard of a foot powered lathe, right?
John in NM
>Here's a hand powered lathe that uses the foot as a tool rest!
A friend of mine took this pic on a trip to Morocco. Bet that guy's back aches at the end of the day!
Knowledge You Can Build On — Est. 1998
You've heard of a foot powered lathe, right?
John in NM
>Here's a hand powered lathe that uses the foot as a tool rest!
A friend of mine took this pic on a trip to Morocco. Bet that guy's back aches at the end of the day!
Whoa!
Ellis Walentine, Host
>I'll bet his foot hurts, too. Yikes.
Thanks for the image, John.
Ellis
Re: Whoa!
Alan in Little Washington (NC)
>Have you seen Roy Underhill's foot-powered tablesaw. It takes a lot of pumping. I was at his school the day he got it and he worked up quite a sweat trying to cut some boards.
Re: Whoa!
Bill White
>Ah, let's see there.....
I think that spindle on the right was just a little bit smaller than the first one.
Just to think that we worry if the TS top isn't mirror bright and flat within .0006".
Bill
Re: Whoa!
mamc
>Ummm... Is that a toe nail grind he has on that gouge?
Re: You've heard of a foot powered lathe, right?
Rob Hix - Kin George, VA
>That is absolutely mind boggling. I noticed in the picture is looks like he had some rather ornate painted turnings sitting behind the bundle of spindles.
What gets me is that this guy is turning with that, and we all think we need the latest and greatest variable speed lathe to do anything. Not only that, but we have it in our HOBBY shops. Man, we do have it great in America.
Thanks for sharing,
Rob Hix