Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

New Table Saw

Posts

New Table Saw

#1

New Table Saw

Lester Gillett/Independence Mo

>I am looking at a Woodtek 10" saw and just wanted to git some

feed back for you all if this saw is any good. Its like a Delta

Unisaw buy i know its not quite the same. would like to up grade

from my Sears saw to a unisaw style saw. the price is right but

i don't want to buy and it not hold up.

Thanks

Lester

Re: New Table Saw

#2

JL

Re: New Table Saw

JL

>I understand wanting to upgrade :). It took me forever. Why a Woodtek? The Grizzly G1023 is a proven commodity and they now have the G0690 with a riving knife for ~$1250. Considering they are offering free shipping on the G1023, I would certainly give that a look.

Re: New Table Saw

#3

Re: New Table Saw

Jerry Nicholson

>And it's only about 150 miles from Independence to Springfield where Grizzly has all those goodies lined up for close inspection (Corner of W. Battlefield Rd. and S. Kansas Expressway). Of course the BIG Bass Pro place is only 2 or 3 miles from the Grizzly store.

Re: New Table Saw

#4

Re: New Table Saw

John Veerkamp,Western Mo

>My thoughts exactly Lester. You could even stop by here on your way down or back,

John

Re: New Table Saw

#5

Re: New Table Saw

Lester Gillett/Independence Mo

>Will i thank every one. first the saw is new with a few miner dings

and its $400. Its here in Independence so could go see it befor. Its

on ebay so i might go higer but if doesn't go to high it might be a

good price, just wanted to know if Woodtek is a good company and do

they handle trouble and parts as good as some of the outher co ?

Would like to hear from any one that has a woodtek and how they like

it and any trouble they have had.

Lester

Re: New Table Saw

#6

How about a Taiwan-made *LINK*

North of the Border

>Ridgid TS 3660? - $400 US or less. Its earlier version TS 3650 has been rated best value by FWW and others. Ridgid also has rolled out a cabinet TS with the riving knife featured.

I bought the TS 3660 recently (cast iron top and a 300lb monster) and so far it has exceeded my expectations. Fence and mitre gauge are dead on square to blade. The herculift mobile base is super and easily takes care of its weight. Only complaint? - not a riving knife TS.


TS 3650 review

Re: New Table Saw

#7

Re: New Table Saw

Mike Fitterling

>Woodtek is the house brand of Woodworkers Supply. I have no direct experience with their machinery, so take this with a grain of salt. I have a "wholesale" account with them and have never had any customer service problems with them.

A while back I was pretty much placing an order with them weekly. Wholesale customers get a different catalog that shows their complete equipment line. They make a lot of industrial stuff (even a large RAS) not shown in their consumer catalog; they also sell major brands (Delta, PM, etc.) of larger equipment.

Based on my business relationship with them and from the specs I have seen in their catalogs on their equipment I would buy one of their machines if the price was right. I was actually considering their floor standing mortiser for a while, but I have decided now on old American arn for that. I would want to look at the saw first, of course, but I think you could end up with a nice saw for a decent price.

I could look up the specs for that machine if you want. Just let me know.

Cheers,

Mike

Re: New Table Saw

#8

Re: New Table Saw

Chuck in ND

>At $400, it's probably a Hybrid. Hard to say for sure without a model number.

Re: New Table Saw

#9

Re: New Table Saw

steve mackay

>Amen from the back of the room for Griz. $ 400 ? For an additional two or three you get a NEW TS, warranty, service, no dings, peice of mind and a heavy, stable, powerfull machine. I went through three Carftsmans before spending the same amount for the Griz I'm REALLY happy with. Live and learn I guess.

Re: New Table Saw

#10

Price in 2007

Mike Fitterling

>I went out to the shop and got out the 2007 Woodworkers Supply catalog. The SRP on the Woodtek 3hp 10" tilting arbor table saw (cabinet saw) was $1199.99. It was available in right or left tilt at that price. Weighed in at 407 lbs. Came standard with a 50" "T-square" fence system (Beisemeyer clone). No mobile base. At least in 2007 they did not list a hybrid saw, just the contractor saws (2 models--a right and a left tilt) and 10", 12" and 14" cabinet saws. I think at something close to $400 is a pretty good deal; only thing is the ugly yellow and green paint scheme.

Good luck,

Mike

Re: New Table Saw

#11

Re: New Table Saw

Lester Gillett/Independence Mo

>Its a 114761 saw and i am going to go look at it tomorrow. I looked at

it on woodworkers pro site and it sells for about 1200 so if its in

good shape and i can git it for about 400 to 500 i might try to git it. Want to thank all that responded.

Lester

Re: New Table Saw

#12

Re: New Table Saw

Jim Dillon

>Lester,

If you decide to go for it, keep us posted on how you like it. Always good to hear about brands that don't get much press, but may turn out to be good deals.

Jim

Re: New Table Saw

#13

Pic for everyone following this saga.

Rod Peterson -- Ormond Beach

>This is the image of the saw from the Woodworkers Supply website:


Doesn't look like a hybrid to me.

Rod